Sony DVP-NS611HP Service Manual page 21

2-4. OPTICAL PICK UP AND BU HOLDER ASSEMBLY
(DEVICE, OPTICAL KHM-313CAA/C2RP)
3 Optical Device
(KHM-313CAA/C2RP)
6 Two Insulator
Caution Point on the Laser Diode:
Laser Diode in the optical Device is very sensitive to Surge Current
or ElectroStatic Discharge (ESD):
After take-out FMO-018 (Non Euro Model)/FMO-019
(Euro Model) Flat Flexible Cable from CN101 of MV-60
(Non Euro Model)/MV-62(Euro Model) board immediately
ground FMO-018/FMO-019 Flat Flexible Cable pattern using
short clip. Metal paper clip can be used as short clip.
DVP-NS611HP/NS710H/NS710HP/NS717HP/NS718H/NS718HP/NS728H/NS728HP
1 Four Insulator Screws
2-3
Note:
Solder shortland before remove the
FMO-018 (Non Euro Model)/
FMO-019 (Euro Model) Flat Flexible
Cable from 24 pin BU connector.
6 Two Insulator
5 FMO-018 Flat Flexible Cable (CN101, 24P)
(Non- Euro Model)
FMO-019 Flat Flexible Cable (CN101, 24p)(Euro Model)
4 MD-125 Harness (CN201, 6P) (Non-Euro Model)
MD-127 Harness (CN201, 6P) (Euro Model)
2 FFC Holder