Vixen AP Equatorial Mount Instruction Manual page 65

APPLICATION
5
While holding the declination body, attach the declination body
securely with the two supplied M5-25mm long screws using the 4mm
Allen wrench.
6
Attach the AP clamp mount head unit onto the DEC motor module
with the electrical contact on the outside so that the central protruding
portion of the AP clamp mount head fits snugly onto the central hollow
portion of the DEC motor module as shown in the figure.
7
Turn the DEC motor module to change the orientation so that the
screw holes (larger holes with no thread) are aligned in tandem. Attach
the DEC motor module with the three supplied socket head cap
screws securely using the 4mm Allen wrench.
8
Attach the DEC motor module assembly onto the declination body so
that the electrical contact on the DEC motor module fits snugly onto
the counterpart on the declination body as shown in the figure.
Caution:
The internal joint electrical contact of the declination body is very
delicate. Take care not to touch with fingers or other objects.
4mm Allen wrench 4mm Allen wrench
DEC motor module DEC motor module
Mount head unit Mount head unit
DEC motor module DEC motor module
65
Mount head unit Mount head unit
Electrical contact Electrical contact
3mm Allen wrench 3mm Allen wrench
DEC motor module DEC motor module
Electrical contact Electrical contact