Hardware Setup - D-Link DWR-932 Quick Installation Manual

HARDWARE SETUP

QUICK INSTALLATION
SI M
SI M
SI M
SI M
4
1. Remove the battery cover on the back of the device by
sliding it up, then remove the battery.
2. If you want to configure the DWR-932 wirelessly, take note
of the SSID (network name) and password on the label
under the battery, you will first need to connect to this SSID.
3. Insert the SIM card into the SIM card slot as shown,
ensuring the gold contacts are facing down.
Note: If you wish to use the onboard storage functionality,
install a microSD card at this time.
4. Reinsert the battery and attach the battery cover.
5. Connect the Micro USB end of the USB cable to the Micro
USB port on the bottom of the DWR-932 and plug the USB
end into the USB port of the power adapter or a PC to
charge the battery. After charging is complete, you may use
this usb port to power your mobile devices.
6. Press and hold the power button for four seconds to turn on
the device. Once the power LED icon lights up solid green
you may proceed with configuration.
DWR-932