BMW M4 COUPE Owner's Manual page 208

Mobility
row 1 and the inner part onto the centering
component, arrow 2. Make sure that the
tail lamp engages in the rubber mount.
4. Screw the tail lamp on with the two nuts.
5. Insert and secure the cover. Make sure that
the tubular seal is not pinched.
Lights in the tailgate
General information
Observe the safety information, refer to
page 204.
Reversing lights: 16-watt bulb, PW16W.
Inner brake lights: 21-watt bulb, H21W
All lights in the tailgate are made using LED
technology. In the case of a malfunction, con‐
tact a dealer's service center or another quali‐
fied service center or repair shop.
Accessing the lights
1. If needed, remove warning triangle, refer to
page 213, and bracket with the screw‐
driver from the onboard vehicle tool kit, re‐
fer to page 203.
2. Remove the emergency release and the
wire cable from the handle.
208
Replacing components
Online Edition for Part no. 01 40 2 974 597 - VI/16
3. Use the screwdriver from the onboard ve‐
hicle tool kit to loosen and completely re‐
move the screws on the trim.
4. Press together hinge trim, see arrow, to re‐
lease the clips.
Grasp the trim, pull the hinge trim down‐
ward and remove it.
5. Carefully loosen the trim from the tailgate,
starting at the edge and working toward
the area around the recessed grips. Make
sure that the trim does not become stuck.
6. Carefully swing out the trim.