Jabra GN9330e Quick Start Manual

How to connect my Jabra GN9330e with Aastra Open Phone
63 and 65
Jabra GN9330e
Prerequisite:
Jabra GN9330e + Jabra 8800-00-93 + AZ – Adapter (available from Aastra /
DeTeWe)
In combination with one of the following phones:
Open Phone 63 / 65
System:
Open Com 100 from Software 5.2
Open Com 1000 from Software 3.2
Connection:
1. Insert the supplied RJ9 to RJ9 connection cable into the socket of the
Jabra GN9330e base marked with the "phone" symbol and the other
end into the "handset" socket of the AZ adapter.
2. Now insert the 8-pin RJ45 plug of the Jabra 8800-00-93 connection
cable into the Jabra GN9330 base socket marked "AUX".
3. Please connect the receptacle connector to the AZ adapter socket
marked with the "bell" symbol and insert the 6-pin modular plug into
the "second handset" socket of the AZ adapter.
Software setup:
Put the headset into the base and activate the "RHL mode".
Hold down the "phone" button on the base of the Jabra GN9330e for
https://www.jabra.co.uk/supportpages/jabra-gn9330e/9337-508-402/faq/29f778e6-d8bf-
4e0a-baea-a315459d0cc9
24/04/2021 11:16
Page 1 of 3