Table of Contents
Advertisement
IP/Port Setting
This sub-menu allows you to configure the camera's IP address mode and assign its
port number.
DHCP: If your network uses a DHCP server, select this option. With this option, the
camera will be assigned an IP address from the DHCP server automatically. However,
please make sure that the DHCP server is set to assign a static IP address to the
camera.
Static IP: You can manually assign a static IP address to the camera.
PPPoE: If your application requires a direct connection from a DSL modem through the
camera's RJ-45 LAN port, select this option and enter the User ID and Password into
the respective boxes. The camera will get an IP address from the ISP at start up.
HTTP Port: Assign a port number for the camera. The default HTTP port is 80.
Click Setup to save the settings.
36
Advertisement
Table of Contents
