Table of Contents
Advertisement
BALANCE Wide shelving
70103, 70104
Step 3
Parts, fittings and tools
NEVER DRAG UNIT ALONG
THE GROUND
Step 4 Final assembly
Parts, fittings and tools
B
C
Mark the drill hole positions.
Remove the unit and drill a hole for
wall plug in the marked positions.
Chose correct fixings for your type
of wall (see page 7).
With help, lift the unit up and
aligning the holes, fix to the wall
using the correct screws and tighten
fully.
The assembly is now complete.
Warning
Serious or fatal crushing
injuries can occur from
furniture tipping over. To
prevent this furniture
tipping over it must be
permanently fixed to
the wall.
WARNING
Always lift the unit from the base when moving it, do not drag along the
ground, as this may damage the legs. It is recommended that two people
should move the unit, never move it alone.
6
ALWAYS LIFT THE UNIT FROM
THE BASE WHEN MOVING
C
B
Advertisement
Table of Contents
