Samsung SMT-C1140 User Manual page 72

Manual Scan
To tune-in new channels, the STB has been
provided with 'Manual Scan' where the
channel data can be entered by the user.
After selecting the 'Manual Scan' from the
Channel Menu, the following screen will be
displayed:
- Input the frequency of the channel you want to find.
The followings are defined as a default, but
optionally you can choose it. Signal Status bar
shows you if it is valid. You can select the value of
once, daily, weekly.
- Input the Network ID of the channel you want to find.
- Select the Modulation of the channel you want to
find. You can select the value of 16, 32, 64, 128, 256.
- Input the symbol rate of channel you want to find.
- Enter the guard band time to scan. You can choose
from 0 to 15 min.
- After select option, move to scan button and press
OK button to start the scan process.
26
_ © SAMSUNG Electronics Co., Ltd.