Advertisement
Distortion 1 and 2 Footswitches/LEDs
These footswitches bypass or engage each distortion effect. LED
illuminates when effect is on.
Output Jack
Low-impedance output jack connects to amp or to next effect pedal in
signal chain.
Sub Level 2
Adjusts clean-output volume level from low-pass filter.
Frequency 2
Adjusts low-pass frequency. Frequencies below knob setting will be
routed around distortion effect, providing a clear, basic tone to layer
the distortion on.
Level 2
Adjusts output level of Distortion 2.
Tone 2
Adjusts brightness of Distortion 2 circuit.
Gain 2
Adjusts sustain or drive of Distortion 2 circuit.
Gain 1
Adjusts sustain or drive of Distortion 1 circuit.
Tone 1
Adjusts brightness of Distortion 1 circuit.
Advertisement
