Loc - AdobeAir ArticCircle ED143 Specifications

Commercial/Industrial Arctic Circle Project Submittal Sheet
Models ED830, ES830, ED143, ES143, ED213, and ES213
Project
Location
Architect
Engineer
Contractor
Submitted By
*Total design sensible heat load of project.
Cabinet – Motor – Motor Sheave – Pulley and Belt Kit – Pump
Cabinet
Ref. No. Qty. Model No. CFM
1
2
3
4
*NOTE: Each unit (ready to operate) consists of one cabinet, one blower motor, one pulley-belt kit, one motor sheave, and one pump.
Your local Arctic Circle Representative of AdobeAir, Inc., is ready to assist you in unit
selection and application.
Since AdobeAir, Inc. follows a policy of continuous product improvement, we reserve
the right to change specifications and design without notice.
©All rights reserved, AdobeAir, Inc., Phoenix, Arizona, 2002
Designed and Manufactured in the United States by:
AdobeAir, Inc.
500 S. 15th Street
Phoenix, AZ 85034
www.AdobeAir.com
8
SHL*
Date
Motor Specifications
Static
Pressure HP Volts Phase
Arctic Circle evaporative coolers and components are designed and tested in
accordance with one or more of the following standards or agencies:
Air Delivery: Data published derived from tests conducted in accordance with A.M.C.A. (Air
Movement and Control Assoc.) Standard 210.
Aspen Pads: Built to Federal Specification PP-E-911 for Type 1, Class A, Grade 4.
Sealant: Water Immersion: per ASTM D870. Flexibility: per ASTM D756. Corrosion
Resistance: per ASTM B117. Cycle Freeze/Thaw: per ASTM C117.
POLYBOND
Adhesion: per ASTM D3359. Impact Resistance: per ASTM D2794. Flexibility: per ASTM
D522. Specular Gloss: per ASTM D523. Surface Burning Characteristics of Building
Materials (best rating) per U/L 723 and ASTM E-84.
Pumps: Recognized under the U/L component recognition program for the application –
construction, thermal overload, running overload, and locked rotor protection.
Blower Motors: U/L recognized general purpose drip-proof.
Polymeric Materials: Tested in accordance with U/L 94 and 746C. Covered by City of Los
Angeles Research Reports (C.O.L.A.) RR930224 (for all single phase applications), or
RR930190 (for 3 phase applications) Electrical, and RR8141 Mechanical.
Kits
Amps Motor Sheave Pulley-Belt Kit No.
® : Corrosion Resistance: per ASTM B117. Pencil Hardness: per ASTM D3363.
Pump
Model No.
L900798A May 2002