Notes To Users - Toshiba BV410D-GS02-QM-S Owner's Manual

Notes to Users

CE Compliance (for EU only)
This product is labelled with the CE mark in accordance with the provisions of the applicable European Directives,
notably the Low Voltage Directive 2014/35/EU, the Electromagnetic Compatibility Directive 2014/30/EU, the RoHS
Directive 2011/65/EU, (EU) 2015/863 for this product and the electric accessories.
CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH, Carl-Schurz-Str. 7, 41460
Neuss, Germany, phone +49-(0)-2131-1245-0.
For a copy of the related CE Declaration of Conformity, please contact your dealer or Toshiba Tec Corporation.
This is a Class A product. In a domestic environment, this product may cause radio interference in which case the
user may be required to take adequate measures.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
(for USA only)
CAN ICES-3 (A) / NMB-3 (A)
This Class A digital apparatus complies with Canadian ICES-003.
(for CANADA only)
California Proposition 65:USA-California only
This product can expose you to chemicals including 1,3-Dichloro-2-propanol, which is/are known to the State of
California to cause cancer.
For more information go to
www.P65Warnings.ca.gov.
The device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of
view.
Notes to Users 1