Jabra PRO How To Connect

How to connect my Jabra PRO / GO with Avaya IP 2410, IP
5410, IP 6416D, IP 6416M, 6424D, 6424M
Jabra Pro 9465 Duo
Prerequisite:
Jabra PRO 9460 / 9470 + Jabra Link 14201-20
In combination with one of the following Avaya devices:
IP 2410
IP 5410
IP 6416D+M/ 6424D+M
Connection:
1. Plug the supplied cable into the socket marked "phone" on your Jabra
PRO 94x0 base and the other end to the socket marked with a "phone"
symbol on the EHS adapter.
2. Now connect the cable marked red to the socket marked "AUX" on the
EHS adapter and to the "AUX" socket on your Jabra PRO 94x0 base.
3. Now connect the cable marked white and "A" to the socket marked
"Headset/handset" on the EHS adapter and to the "headset" socket on
your phone.
Important: If you have a 6416D+M / 6424D+M phone, use the cable
marked white and "B" (instead of the cable marked "C").
Connect the signal sensor to the EHS adapter and fasten it in the middle
of the phone's loudspeaker.
https://www.jabra.com/supportpages/jabra-pro-9465/9465-69-804-105/faq/cfcf3c30-
d00a-487b-971e-ea1f652c45b2
24/04/2021 18:51
Page 1 of 3