Body Fat And Total Body Water; Program Personal Data; Set Memory; Set Normal Or Athlete - Taylor 5736F Instruction Manual & Warranty Information

1. Set Memory

Press the [ON] key to enter body fat and total body water estimation mode.
The memory number will blink (Fig.3). Press the [
memory location (P0-P3). Press [SET] to confi rm.

2. Set Normal or Athlete

The Normal icon blinks (Fig.4a). Press the [
Normal and Athlete. Press [SET] to confi rm. NOTE:
only available for those 15-85 years or age. (See "Why the Athlete Mode is
Neccessary in a Body Fat Analyzer.)
N
a
3. Set Gender
The gender icon blinks (Fig.4). Press the [
and female. Press [SET] to confi rm.
A
4. Set Age
The age blinks (Fig.5). Press the [

confi rm.
A
] or [ ] key to select a
 
] or [ ] key to toggle between
 
The Athlete mode
A
] or [ ] key to toggle between male
 
A
] or [ ] key to adjust the age. Press [SET] to

A
5. Set Height
The height blinks (Fig.6). Press the [
[SET] to confi rm. The data is successfully memorized. Meanwhile, the screen
will display the memory location, height, age, gender and normal/athlete
selection (Fig.7).
6. Measuring
Then the scale shows "0.0" (Fig.8). Step on the scale with bare feet and stand
still while the weight is being measured.
A
7. Display
Weight, body fat percentage, total body water percentage and muscle
is
mass percentage will be displayed 3 times sequentially (Fig.10). The scale
turns off automatically.
A
] or [ ] key to adjust the height. Press
 
Step On Scale
With Bare Feet!
A A A
MM