Technical Data - Husqvarna LC 151 Operator's Manual

Technical data

Engine
Brand
Engine type
3
Displacement, cm
Speed, rpm
Nominal engine output, kW
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Engine lubrication type
Fuel tank capacity, litre
Oil tank capacity, litre
4
Engine oil
Weight
With empty tanks, kg
5
Noise emissions
Sound power level, measured, dB(A)
Sound power level, guaranteed, L
6
Sound levels
Sound pressure level at operators ear, dB(A)
7
Vibration levels
3
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
4
If SAE-30 oil is used at temperatures lower than +5 °C, there is a risk that it does not lubricate the engine
sufficiently. This can cause engine damage. Refer to
for low temperatures.
5
Noise emissions in the environment measured as sound power (L
2000/14/EC.
6
Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB (A).
7
Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s
16
Technical data
LC 151
Husqvarna
Single cylinder, 4-
Stroke, Forced Air
Cooling, OHV
166
2800
3
2.7
Husqvarna HQT–7
0.7–0.8
Splash
1.0
0.5
SAE 30
31.1
96
dB(A) 98
WA
86
LC 151S
Husqvarna
Single cylinder, 4-
Stroke, Forced Air
Cooling, OHV
166
2800
2.7
Husqvarna HQT–7
0.7–0.8
Splash
1.0
0.5
SAE 30
32.6
96
98
86
To replace the engine oil on page 13 for the correct oil
) in conformity with EC directive
WA
LB 256SP
Husqvarna
Single cylinder, 4-
Stroke, Forced Air
Cooling, OHV
166
2800
2.7
Husqvarna HQT–7
0.7–0.8
Splash
1.0
0.5
SAE 30
33.1
97
98
86
2
.
1566 - 001 - 16.09.2020