Related Manuals for NARGESA MX340G
Summary of Contents for NARGESA MX340G
- Page 1 IRONWORKER MACHINE MX340G INSTRUCTIONS BOOK PRADA NARGESA, S.L Ctra. de Garrigàs a Sant Miquel s/n · 17476 Palau de Santa Eulàlia (Girona) SPAIN Tel. +34 972568085 · nargesa@nargesa.com · www.nargesa.com...
- Page 2 Thank you for choosing our machines www.nargesa.com...
-
Page 3: Table Of Contents
6.4. Working at manual mode .................... 6.5. Working at automatic mode ..................6.6. Meter deletion ......................6.7. Desactivation of the machine ..................6.8. Unusual performance situations .................. 7. WARNINGS ..........................8. ACCESSORIES ........................TECHNICAL ANNEX INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G... -
Page 4: Features Of The Machine
Picture 1. Outer dimensions of the MX340G 1.2. Description of the machine MX340G, is specifically designed for punching metal pieces with different shapes depending on the kind of punch. It may have some other uses by adapting the required accessories. It will be also usable at other services whenever the manufacturer’s rules are followed. -
Page 5: Identification Of The Machne
Electrical cabinet Hold stand base Die base fastening screws Electro-distributor Electrical motor Safety valve Pedal Oil filling cup Oil level Piston Axel Punch fastering thread Punch Hydraulic circuit container Picture 2. Nomenclature of Machine Parts INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G... -
Page 6: General Characteristics
1.5. Description of safety devices One of the safety devices the MX340G's got is the extractor piece located in the front part of the machine to hold up the material and prevent from placing hands between the punch and the piece. -
Page 7: Transport And Storage
* Temperature from -25 to 55ºC or 75ºC for a length of time no longer that 24 hours (keep in mind that these temperatures are just for storage conditions). * It is advisable not to stack machines or heavy objets on them. * Do not dismantle it for storage. INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G... -
Page 8: Maintenance
- If it is daily used but just on and off, then grease ut every week. -If the use is just sporadic, then grease it once a month. Picture 6. Stop The Machine Picture 7. Press the emergency stop INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G... -
Page 9: Installment And Starting Up
Picture 9. Operative’s working area 4.3. Admissible outer conditions - Temperature between +5ºC and +40ºC without overpassing an average temperature of +35ºC during 24 hours - Humidity between 30% and 90% without water condensation. INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G... -
Page 10: Connection To Power Supply
This must be connected to a power supply with ground wire. MX340G, is equipped with an 230V/400V three phased engine, 2.2 Kw star connected to be connected to a 400v power supply. It sould be connected to only one power supply in the power source indicated. If the line tension is not the one indicated then it is necessary to change the motor bobbins connection and the transformer as it is indicated in the pictures. -
Page 11: Operation Manual
Key to cancel one operation ON key to start the machine Key to go to automatic mode Key to erase the counting of punch Key to go manual operations mode Main switch Picture 13. Control Panel INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G... -
Page 12: Introduction
5.1. Introduction This manual is designed to be an useful tooling for the MX340G user since it has important information about the usage and specifications of the machine. Therefore it is important to follow step by step all the points detailed in this manual so to get to achieve a better understanding of the performance of the machine. -
Page 13: Working At Manual Mode
INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G... -
Page 14: Meter Deletion
5.6. Meter deletion As you have read in the previous sections, MX340G has got a punching meter that increases everytime you press the pedal. This fact could be useful in case you need to count the punching operations required for either a specific piece or the operations a third user has carried out with your machine. -
Page 15: Desactivation Of The Machine
ERROR IN THE UPPER ROUTE END Figura 22. Information about the Error in the Upper route end Error in the Lower route End of the MX340G. VERIFIES THE TURNING DIRECTION OF THE ENGINE Figura 23. Information about error in the Lower Route End... - Page 16 For safety reasons, it is not permitted a new activation of the MX340G until the unusual situation has been solved ou. In case of Emeregency Situations, it can be solved out rearming the emergency Stop button.
-
Page 17: Warnings
- Keep a safety distance between the machine and the operative while the machine is performing. - Do not use any other tooling but the ones provided be NARGESA. - All tooling that can be fitted to the machine must be fixed to the base and also to the piston. -
Page 18: Accessories
7. ACCESSORIES All Nargesa Hydraulic Punching Machines are equipped with the punching tool that include the fitting nut for punches and the base holder for dies. The rest of accesories are optional, which means each customer equips his machine as desired. - Page 19 40 mm 64 mm 43,5 mm 25x45/25x50mm 50 mm 58 mm 54 mm 27x63/27x75mm 75 mm 58 mm 79 mm N100 30x87/30x100mm 100 mm 58 mm 104 mm For different sizes, please ask the manufacturer INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 20 7x10/7x15/9x13/9x19/11x17/11x23/13x19/13x25/15x21mm 46 mm 28,5 mm 15x27/17x25/19x30/20x34mm 60 mm 32 mm 25x43mm 78 mm 28,5 mm N100 25x70mm 100 mm 28,5 mm N125 25x96mm 125 mm 28,5 mm For different sizes, please ask the manufacturers. INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 21 Radius from 3 a 15mm TAP 28 CAB 46 MRE40 Radius from 16 a 22mm TAP 40 CAB 60 MRE50 Radius from 23 a 30mm TAP 50 CAB 78 For different sizes, please ask the manufacturers. INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 22 MODEL, R (radius), W (flat bar width), T (flkat bar thickness) In models B and C specify hole diameter. The ear shaped legth is always adjustable. Production capacity: 450 to 600 parts per hour. INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 23 Stripping Tooling to 90º Adjustable 100x100 MX340G Stripping tooling for angle etc. Adjustable up to 100x100mm to 90º fijos. Units per machine Max. Cutting capacity Weight 100x100x4 21 Kg Folding tooling 100mm. MX340G Tooling for folding sheet and flat bar up to 100mm. 88º...
- Page 24 Tooling to flatten and punch the pipe for fences. It admits different pipe diameters. Exchangeable hole size. Parts per tooling Max. Pipe diameter Min. Pipe diemeter Hole diameter Weight 50mm 10mm Exchangeable 23 Kg INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 25 Units per machine Max. Sheet Thickness Weight 21 Kg Angle & U Profile punching Tooling MX340G Base holder for angle punching. Suitable for punches and dies of different diemeters, exchangeables. Units per machine Max. Hole diameter . Hole diameter...
- Page 26 Locks Punch and Die MX340G Set for making the lock hole in metal sheet. Necessary complements: CAB60 and TAP40 Parts per set Max. Thickness Weight 1 Kg INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
-
Page 27: Technical Annex
Technical annex Hydraulic press MX340G All parts Electric map Electrical cabinet Hydraulic map... - Page 28 A1. All parts INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 29 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 30 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 31 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 32 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 33 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 34 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 35 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 36 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 37 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G...
- Page 38 If supply tension is 230VAC, hacer un puente entre 230VAC and the common connector J3 If supply tension is 400VAC, then make a bridge between 400VAC and the connector common J3 NEVER MAKE A BRIDGE BETWEEN 230VAC AND 400VAC FROM CONNECTOR J3 INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G A 12...
- Page 39 A3. Electrical cabinet Filter Engine protector Mini-contactor Control Plate INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G A 13...
- Page 40 A4. Hydraulic map Piston Electro-distributor Base plate with limiting valve Pump Motor Joint Filter INSTRUCTIONS BOOK OF HYDRAULIC PRESS MX340G A 14...
- Page 41 3. Complete the form with your details and press Message Sent: confirms your data has been successfully sent to Prada Nargesa SL. Your machine has been registered and has a warranty of three years in total. Your request has been sent correctly. We will contact you right...