BMW Isetta Instruction Manual page 36

The combined tail, stop and directional
lights with integral rear reflectors are also
equipped with Bilux
containing one lamp No. 1034/12 V-34/4 cp.
To replace the bulb remove rim and glass unit
after taking out the fixing screw at the bottom,
unhook the bulb holder retaining spring
(figure 51) and withdraw the bulb holder from
the opposite holder slot. The bulb can then,
be withdrawn from the holder, proceeding in
the manner described for the front signal
lights (Figure 52).
License plate light. Detach the bulb carrier
and cover assembly whereupon the spherical
bulb No. 89/12 V-6 cp can be removed in the
above described manner (Figure 53).
The all-round glass paneling of the BMW
Isetta U.S. Model features a windshield of
laminated glass and side and rear windows of
toughened safety glass.
Dimensions:
Owing to the new bumper arrangement the
U. S Model has an:
overall length of
and an
overall width of
lamps, each unit
93.7 in
55.5 in
36