Advertisement
MASCOT LX
• Install and connect the Outdoor Sensor to terminals
marked Outdoor Sensor.
• Then go to the Installer Mode to complete the set up.
1.
• Press and Hold BOTH the
Down and Select buttons until
"U00" appears
3.
• Press the Up button until it reads "15"
• Press Select button, "U00" will stop
flashing.
• You can now scroll through the Installer
Parameter list.
Outdoor Reset
Installer Mode, Outdoor Reset
2.
• Press Select button
• "U00" will flash
4.
• Use the Down button and scroll to "P64"
• Press Select to adjust the Low Boiler Supply
Temperature
• Press Select to save the change
Page 5
Advertisement
