Osd Warning Messages - Dell S3422DW User Manual

OSD warning messages

When the monitor does not support a particular resolution mode, the following
message is displayed:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 3440 x
1440.
Before the DDC/CI function is disabled, the following message is displayed:
When the monitor enters the Standby Mode, the following message appears:
If you press any button other than the power button, the following messages will
appear depending on the selected input:
Dell 34 Monitor
The current input timing is not supported by the monitor display.
Please change your input timing to
monitor listed timing as per the monitor speci cations.
Monitor specifications
Dell 34 Monitor
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
Dell P2418HZ
Dell 34 Monitor
Entering Standby Mode.
3440x1440, 100Hz or any other
for the Horizontal and Vertical
No
S3422DW
Operating your monitor
S3422DW
│ 47