GE Multilin 489 Instruction Manual page 89

CHAPTER 4: INTERFACES
489 GENERATOR MANAGEMENT RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
Printing Setpoints and Actual Values
The EnerVista 489 Setup software allows the user to print partial or complete lists of
setpoints and actual values. Use the following procedure to print a list of setpoints:
Select a previously saved setpoints file in the File pane or establish
communications with a 489 device.
From the main window, select the File > Print Settings menu item.
The Print/Export Options dialog box will appear.
Select Settings in the upper section.
Select either Include All Features (for a complete list) or Include Only
Enabled Features (for a list of only those features which are currently
used) in the filtering section.
Click OK.
The process for File > Print Preview Settings is identical to the steps above.
Setpoints lists can be printed in the same manner by right clicking on the desired file (in the
file list) or device (in the device list) and selecting the Print Device Information or Print
Settings File options.
A complete list of actual values can also be printed from a connected device with the
following procedure:
Establish communications with the desired 489 device.
From the main window, select the File > Print Settings menu item.
The Print/Export Options dialog box will appear.
Select Actual Values in the upper section.
Select either Include All Features (for a complete list) or Include Only
Enabled Features (for a list of only those features which are currently
used) in the filtering section.
Click OK.
Actual values can be printed in the same manner by right clicking on the desired device (in
the device list) and selecting the Print Device Information option.
4–27