5
Removing and Reinstalling the Door
You may need to remove the front and rear doors when installing
components into the rack or when servicing.
To remove the front or rear door:
1.
Open the door. See section 4.
2.
Locate the release lever in the upper-right corner of the front
door or in the upper-left corner of the rear door.
3.
Using your finger, pull down the release lever. This releases the
upper door holder.
4.
When the upper holder is released, slightly lift the door to
remove the lower holder from its slot.
Figure 7
Removing the Rack Door
To reinstall the front or rear door:
1.
Place the lower holder into its slot.
2.
Using your finger, pull down the release lever while fitting the
upper holder into its slot.
Step 4
Release lever
Step 3
11