Attaching Your Acer N20 To The Expansion Sleeve - Acer n20 Manual

7 U s i n g e x p a n s i o n f e a t u r e s
Expansion sleeve
1
2
3
4
94
No. Component
3 CompactFlash Type II slot
4 CompactFlash Type II slot
eject button
5 100-pin expansion slot
6 USB host connector
7 Power socket

Attaching your Acer n20 to the expansion sleeve

Detach the removable battery pack from your handheld (a).
Refer to "To uninstall the battery pack" on page 9.
IMPORTANT: After removing the battery pack, you have about 30 minutes to attach the
expansion sleeve and turn the handheld back on, otherwise you risk losing all data on the
internal memory of your handheld.
Align the handheld's rear panel to the expansion sleeve then, slide it in through the
sleeve's arms (b).
Gently push your handheld downward until you feel it lock.
Slide the battery release switch on the handheld to Lock position.
Usage
Accepts CompactFlash-based peripheral devices.
Press to pop-out any installed CompactFlash-based
device.
Connects the expansion sleeve to your handheld.
Accepts USB peripheral devices.
Connects to the AC adapter to provide external
power supply to the system