Sony STR-DH500 Service Manual page 2

STR-DH500
1) Measured under the following conditions:
Area code Power requirements
US, CND 120 V AC, 60 Hz
AEP, UK 230 V AC, 50 Hz
2) Reference power output for front, center and surround speakers.
Depending on the sound field settings and the source, there may be
no sound output.
Frequency response
Analog 10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Inputs
Analog Sensitivity: 500 mV/
50 kohms
S/N
(A, 500 mV
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT Voltage: 500 mV/10 kohms
SUBWOOFER Voltage: 2 V/1 kohm
Tone
Gain levels ±6 dB, 1 dB step
3) INPUT SHORT (with sound field and tone bypassed).
4) Weighted network, input level.
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
Area code Tuning scale
10 kHz step
530 kHz –
US, CND
1,710 kHz
–
AEP, UK
Antenna Loop antenna
Intermediate frequency 450 kHz
Video section
Inputs/Outputs
Video: 1 Vp-p/75 ohms
COMPONENT VIDEO: Y: 1 Vp-p/75 ohms
P
P
80 MHz HD Pass Through

3)
: 96 dB
4)
)
9 kHz step
531 kHz –
1,710 kHz
531 kHz –
1,602 kHz
/C : 0.7 Vp-p/75 ohms
B B
/C : 0.7 Vp-p/75 ohms
R R
HDMI Video 5)
Input/Output
640 × 480p@60 Hz
720 × 480p@59.94/60 Hz
1280 × 720p@59.94/60 Hz
1920 × 1080i@59.94/60 Hz
1920 × 1080p@59.94/60 Hz
720 × 576p@50 Hz
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
5) The TV output resolution will depends on the capability of TV and
component.
General
Power requirements
Area code Power requirements
US, CND 120 V AC, 60 Hz
AEP, UK 230 V AC, 50/60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT : 5 V, 0.7 A MAX
Power consumption
Area code Power consumption
US, CND, AEP, UK 230 W
Dimensions (w/h/d) (Approx.)
430 × 157.5 × 322 mm
(17 × 6
projecting parts and controls
Mass (Approx.) 7.4 kg (16 lb 6 oz)
Supplied accessories
Operating Instruction (this manual)
Quick Setup Guide (1)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Remote commander (RM-AAU020) (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2 or ECM-AC2a) (1)
Design and specifications are subject to change without notice.
• Standby power consumption: 0.3 W
• Halogenated flame retardants are not used in the certain
printed wiring boards.
• Abbreviation
CND : Canadian model
× 12 inches) including
1/4 3/4