Table of Contents
Advertisement
Cautions: The projector is equipped with ventilation holes
(intake) and ventilation holes (exhaust). Do not block or place
anything near these slots, or internal heat build-up may occur,
causing picture degradation or damage to the projector.
Cautions: When you replace the projector lamp, never touch the
new bulb with your bare hands. The invisible residue left by the oil
on your hands may be shorten the bulb life. Use lintfree gloves or
finger cots are recommended.
Preventing Internal Heat Build-Up
After you turn off the power with the Power button, do not disconnect
the unit from the wall outlet while the cooling fan is still running.
Repacking
Save the original shipping carton and packing material; they will come
in handy if you ever to ship your unit. For maximum protection, repack
your unit as it was originally packed at the factory.
iv
Advertisement
Table of Contents
