Troubleshooting Guide - Kärcher IVS 100/40 Manual

Replacing the main filter
1
2
3
4
1 Filter chamber lid
2 Filter spreader
3 Main filter
4 Sealing ring
1. Standard variant: Release the hose
clamp on the connection hose using a
screwdriver and remove.
HEPA variant: Pull the filter chamber out
of the rubber sleeve.
2. Open the filter chamber latches.
3. Remove the filter chamber lid.
4. Remove the main filter.
5. Check the sealing ring for damage.
8
6. Insert the new main filter in reverse se-
quence and take care to ensure that the
filter spreader is aligned correctly in the
filter bag.
Replacing the HEPA filter
3
2
1
1 HEPA filter
2 HEPA box fastening screws
3 HEPA box cover
4 Strap
5 Connection hose
1. Release the strap.
2. Pull off the connection hose.
3. Remove the fastening screws using a
suitable tool.
4. Remove the HEPA box lid.
5. Remove the HEPA filter.
6. Insert the new HEPA filter.
7. Fit the HEPA box lid and screw in place.
8. Attach the connection hose and fasten
with the strap.

Troubleshooting guide

DANGER
Device unintentionally starting / electric
shock
Unintentional starting of the suction motor
can cause injuries. Voltage on electrical
components can lead to an electric shock.
Switch off the device and unplug the mains
plug before performing any work on the de-
vice.
The motor (suction turbine) does not
start running
No electrical voltage present
 Check the socket and the power supply
fuse.
English
4
5