Shark KLIK N' FLIP S6001EU Owner's Manual page 27

11. DO NOT handle the plug or Steam Mop with
wet hands or operate it without wearing shoes.
12. DO NOT pull or carry by cord, use cord as
a handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
Steam Mop over cord. Keep cord away from
heated surfaces.
13. DO NOT unplug by pulling on power cord. To
unplug, grasp the plug not the power cord.
Do not use extension cords or outlets with
inadequate current-carrying capacity.
14. DO NOT put any objects into the the steam
nozzle openings. Discontinue use if the steam
nozzle is blocked.
15. DO NOT put hands or feet under the Steam
Mop. It gets very hot.
16. Use ONLY on flat, horizontal surfaces. DO NOT
use on walls, counters, or windows.
17. DO NOT use on leather, wax-polished furniture,
synthetic fabrics, velvet, or other delicate,
steam-sensitive materials.
18. DO NOT add cleaning solutions, scented
perfumes, oils, or any other chemicals to the
water used in the Steam Mop as this may
damage it or make it unsafe for use. If you live
in a hard-water area, we recommend using
distilled water in your Steam Mop.
19. Never leave any Dirt Grip
while using or storing for any period of
time, as this may damage your surfaces.
20. The liquid or steam must not be directed
towards equipment containing electrical
components, such as the interior of
ovens.
SAVE THESE INSTRUCTIONS
pad in one spot
™
21. You can release the Dirt Grip pad after you have
unplugged the Steam Mop and allowed it to
cool.
22. When cleaning the exterior of the Steam Mop,
unplug the power cord from the electrical outlet and
clean the Steam Mop with a dry or damp cloth. Do
not pour water or use alcohol, benzene, or paint
thinner on the Steam Mop.
23. Extreme caution should be exercised when
using the Steam Mop to clean stairs.
24. Never use Steam Mop without the Dirt Grip pad
attached.
25. Keep your work area well lit.
26. Store Steam Mop indoors in a cool, dry place.
27. To avoid circuit overload, do not operate another
appliance on the same socket (circuit) as the
Steam Mop.
28. To avoid scalding injuries, always unplug and
allow the Steam Mop to cool before removing
or changing mop heads, accessories, or Dirt
Grip pads.
WARNING:
designed to clean hard-floor surfaces that will
withstand high heat. Do not use on unsealed
wood or unglazed ceramic floors. On surfaces
that have been treated with wax and on some
no-wax floors, the sheen may be removed
by the heat and steam action. It is always
recommended to test an isolated area of the
surface to be cleaned before proceeding. We
also recommend that you check the use and
care instructions from the floor manufacturer.
Your Steam Mop is
www.sharkclean.eu 27