3. Loosen the screws secured the rear bracket to the outer
member. Adjust the positions of the front and rear
bracket.
Rear bracket
4. Temporarily secure the front and rear brackets to the
outside of the rack by the eight screws (B5 x 8)
included with RMM-30.
Rack
12.7
Outer members
31.75
12.7
31.75
B5 x 8
Bracket
DNE-1000
Outer member
Front bracket
Rack
12.7
Bracket
B5 x 8
Unit : mm
5. Fully press the inner members to the outer members
while pressing the stoppers of the inner members and
attach the unit in the rack.
Rack
DNE-1000
6. After confirming that the unit can be moved smoothly,
tighten the eight screws (B5 x 8) temporarily secured
in the step 4.
n
When securing the front brackets to the rack by
screws, pull out the unit about 20 cm (8 inches) from
the rack.
7. After attaching the unit in the rack, secure the unit to
the rack by the prepared for screws (RK5 x 16) and
four washers.
Rack
Washers
RK5 x 16
DNE-1000
RK5 x 16
1-6. Attachment of DNE-1000
Outer member
Stopper
Inner member
Washers
1-15(E)