Installation Instructions; Assembling The Monitor; Detaching The Monitor; Adjusting The Viewing Angle - Acer AL1511 Install Manual

Acer al1511: install guide

Hide thumbs Also See for AL1511:

Table of Contents

1. Position the monitor on top of the stand.

If you need to repackage the monitor, please separate the monitor and base, and restore them to

the carton. To detach the monitor:

1. Unplug the AC power cord to make sure the power is off.

2. Pull the 4 hooks on bottom side of the base and hold.

3. Separate the monitor and base and put them into carton.

Important

First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean

dry cloth under the monitor to protect it further.Pull the monitor slightly up and away from the

stand.

The viewing angle of the monitor ranges from -5°~20°.

Caution: Make sure that the computer and the monitor are both disconnected from the

power supply.

Installation instructions

2. Connect the stand into the neck of the monitor

along the track.

Table of Contents

Al1511bm