Chrysler 300 2021 Owner's Manual
  1. Manuals
  2. Brands
  3. Chrysler Manuals
  4. Automobile
  5. 300 2021
  6. Owner's manual

Chrysler 300 2021 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

2021 Chrysler 300
O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading

Related Manuals for Chrysler 300 2021

Summary of Contents for Chrysler 300 2021

  • Page 1 2021 Chrysler 300 O W N E R ’ S M A N U A L...
  • Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..........................7 GETTING TO KNOW YOUR VEHICLE ..................12 GETTING TO KNOW YOUR INSTRUMENT PANEL ............73 STARTING AND OPERATING ....................93 MULTIMEDIA ..........................143 SAFETY ............................159 IN CASE OF EMERGENCY .....................210 SERVICING AND MAINTENANCE ..................228 TECHNICAL SPECIFICATIONS .................... 287 CUSTOMER ASSISTANCE .....................294 INDEX .............................299...
  • Page 4 INTRODUCTION SEATS ..............30 DOORS ..............21 Manual Door Locks........21 Manual Adjustment (Rear Seats) ....31 Symbols Key............8 Power Door Locks ........22 Power Adjustment (Front Seats) ....32 VEHICLE MODIFICATIONS/ALTERATIONS ..8 Keyless Enter-N-Go — Passive Entry ..22 Heated Seats —...
  • Page 5 Turn Signals ..........49 Venting Sunroof ........... 68 UNIVERSAL GARAGE DOOR OPENER Lane Change Assist — If Equipped ..... 49 Opening And Closing The Power Shade ..68 (HOMELINK®) ............41 INTERIOR LIGHTS ..........49 Sunroof Maintenance........68 Before You Begin Programming Ignition Off Operation ........
  • Page 6 PARKVIEW REAR BACK UP CAMERA ..... 129 WARNING LIGHTS AND MESSAGES ....82 AUTOMATIC TRANSMISSION ......99 Red Warning Lights........82 Ignition Park Interlock .......100 REFUELING THE VEHICLE ......... 131 Yellow Warning Lights ......... 85 Brake Transmission Shift Interlock ( Emergency Fuel Filler Door Release ..132 Yellow Indicator Lights.........
  • Page 7 IN CASE OF EMERGENCY RADIO OPERATION AND MOBILE PHONES..158 ENGINE COMPARTMENT ........232 Regulatory And Safety Information...158 3.6L Engine ..........232 HAZARD WARNING FLASHERS......210 5.7L Engine ..........233 ASSIST AND SOS MIRROR — IF EQUIPPED ..210 SAFETY Checking Oil Level ........234 JACKING AND TIRE CHANGING ......214 Adding Washer Fluid .........234 SAFETY FEATURES ..........
  • Page 8 TECHNICAL SPECIFICATIONS CUSTOMER ASSISTANCE TIRES ..............263 Tire Safety Information......263 VEHICLE IDENTIFICATION NUMBER (VIN) ..287 SUGGESTIONS FOR OBTAINING SERVICE Tires — General Information .....271 BRAKE SYSTEM ..........287 FOR YOUR VEHICLE .......... 294 Tire Types ...........275 WHEEL AND TIRE TORQUE SPECIFICATIONS ... 287 Prepare For The Appointment ....

  • Page 9: Introduction

    Dear Customer, Congratulations on the purchase of your new Chrysler vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality. This Owner's Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle.

  • Page 10: Symbols Key

    SYMBOLS KEY If you do not read this entire Owner’s Manual, you may miss important information. Observe all Cautions and Warnings. These statements are against operating VEHICLE MODIFICATIONS/ALTERATIONS WARNING! procedures that could result in a collision, bodily injury and/or death. WARNING! These statements are against procedures that CAUTION!
  • Page 11 Red Warning Lights Red Warning Lights Battery Charge Warning Light Seat Belt Reminder Warning Light Ú page 83 Ú page 83 Transmission Temperature Warning Light — If Door Open Warning Light Equipped Ú page 84 Ú page 85 Electric Power Steering Fault Warning Light Trunk Open Warning Light Ú...
  • Page 12 Yellow Warning Lights Yellow Warning Lights Electronic Stability Control (ESC) OFF Warning Service AWD Warning Light — If Equipped Light — If Equipped Ú page 87 Ú page 86 LaneSense Warning Light — If Equipped Low Washer Fluid Warning Light — If Equipped Ú...
  • Page 13 Green Indicator Lights White Indicator Lights Adaptive Cruise Control (ACC) Set With Target Adaptive Cruise Control (ACC) Ready Light — Vehicle Light — If Equipped If Equipped Ú page 89 Ú page 90 Adaptive Cruise Control (ACC) Set Without Cruise Control Ready Indicator Light Target Vehicle Light —...

  • Page 14: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE KEYS 1 — Unlock 2 — Trunk Open 3 — Lock Your vehicle is equipped with a key fob which 4 — Remote Start supports Passive Entry, Remote Keyless Entry 5 — PANIC Button (RKE), Keyless Enter-N-Go (if equipped), 6 —...
  • Page 15 GETTING TO KNOW YOUR VEHICLE NOTE: To Unlatch The Trunk 1. Remove the emergency key (2) by sliding the emergency key release (1) on the back Push the trunk button on the key fob two times If the vehicle is unlocked by Passive Entry ...

  • Page 16: Sentry Key

    GETTING TO KNOW YOUR VEHICLE 2. Separate the key fob halves using a #2 flat 3. Remove the back cover to access and WARNING! blade screwdriver or a coin, and gently pry replace the battery. When replacing the the two halves of the key fob apart. Make battery, match the (+) sign on the battery to Always remove the key fobs from the ...

  • Page 17: Ignition Switch

    GETTING TO KNOW YOUR VEHICLE The system uses a key fob, keyless push button CAUTION! ignition and a Radio Frequency (RF) receiver to prevent unauthorized vehicle operation. The Sentry Key Immobilizer system is not Therefore, only key fobs that are programmed compatible with some aftermarket remote to the vehicle can be used to start and operate starting systems.
  • Page 18 GETTING TO KNOW YOUR VEHICLE WARNING! (Continued) Engine is not started.  Do not leave the key fob in or near the  Some electrical devices are available (e.g. vehicle, or in a location accessible to chil-  power windows). dren, and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go ON/RUN...

  • Page 19: Remote Start - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: To drive the vehicle, push the unlock button, WARNING! and with a valid Keyless Enter-N-Go key fob in When opening the driver's door with the igni-  Do not start or run an engine in a closed the vehicle, press the brake pedal and place the ...

  • Page 20: To Exit Remote Start Mode

    GETTING TO KNOW YOUR VEHICLE All of the following conditions must be met Once the ignition is placed in the ON/RUN WARNING! before the engine will remote start: position, the climate controls will resume the Do not start or run an engine in a closed previously set operations (temperature, blower ...

  • Page 21: If Equipped

    GETTING TO KNOW YOUR VEHICLE — Manual Temperature Control (MTC) — while the vehicle is in remote start mode, and EMOTE TART OMFORT YSTEMS If Equipped exit automatic override. This includes the OFF QUIPPED button on the climate controls, which will turn In ambient temperatures at 40°F (4.5°C) or ...

  • Page 22: Vehicle Security System - If Equipped

    GETTING TO KNOW YOUR VEHICLE VEHICLE SECURITY SYSTEM — IF EQUIPPED Push the lock button on the exterior If Passive Entry (if equipped) is used to   unlock the trunk, the Vehicle Security system Passive Entry door handle with a valid key The Vehicle Security system monitors the vehicle fob available in the same exterior zone is disarmed and the rest of the vehicle doors...

  • Page 23: Rearming Of The System

    GETTING TO KNOW YOUR VEHICLE handle to the first detent. To unlock the rear EARMING YSTEM WARNING! doors, pull the door lock knob on the door trim If something triggers the alarm, and no action is panel upward. If the lock knob is down when For personal security and safety in the ...

  • Page 24: Power Door Locks

    GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: OWER OCKS If the key fob is located next to a mobile phone, Passive Entry may be programmed on/off The power door lock switches are located on  laptop, or other electronic device, the wireless through Uconnect Settings Ú...
  • Page 25 GETTING TO KNOW YOUR VEHICLE To Unlock From The Driver Or Passenger Side NOTE: There are three situations that trigger a FOBIK-Safe search in any Passive Entry vehicle. With a Passive Entry key fob within 5 ft (1.5 m) If “Unlock All Doors 1st Press” is ...
  • Page 26 GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: The vehicle will only unlock the doors when a After pushing the door handle button, you  valid Passive Entry key fob is detected inside must wait two seconds before you can lock or the vehicle.

  • Page 27: Automatic Unlock Doors On Exit

    GETTING TO KNOW YOUR VEHICLE — NOTE: UTOMATIC OCKS If you inadvertently leave your vehicle's Passive QUIPPED Entry key fob in the trunk and try to close the The auto door lock feature default condition is deck lid, the deck lid will automatically unlatch, enabled.

  • Page 28: Steering Wheel

    GETTING TO KNOW YOUR VEHICLE OWER ELESCOPING TEERING WARNING! — I OLUMN QUIPPED Avoid trapping anyone in a vehicle in a This feature allows you to tilt the steering collision. Remember that the rear doors can column upward or downward. It also allows you only be opened from the outside with the to lengthen or shorten the steering column.

  • Page 29: Heated Steering Wheel

    GETTING TO KNOW YOUR VEHICLE NOTE: average of 80 minutes before automatically WARNING! For vehicles equipped with Driver Memory shutting off. This time will vary based on Settings Ú page 29, you can use your key fob or environmental temperatures. The heated Persons who are unable to feel pain to the ...

  • Page 30: Uconnect Voice Recognition Quick Tips

    GETTING TO KNOW YOUR VEHICLE UCONNECT VOICE RECOGNITION QUICK TIPS Each time you give a Voice Command, you ASIC OICE OMMANDS  must first push the VR button, wait until after The basic Voice Commands below can be given the beep, then say your Voice Command. NTRODUCING CONNECT at any point while using your Uconnect system.

  • Page 31: Additional Information

    GETTING TO KNOW YOUR VEHICLE DRIVER MEMORY SETTINGS — IF EQUIPPED The memory settings switch is located on the DDITIONAL NFORMATION driver’s door trim panel. The switch consists of © 2020 FCA US LLC. All rights reserved. Mopar This feature allows the driver to save up to two three buttons: and Uconnect are registered trademarks and different memory profiles for easy recall...

  • Page 32: Linking And Unlinking The Key Fob

    GETTING TO KNOW YOUR VEHICLE 1. Place the vehicle’s ignition in the ON/RUN To program your key fobs, perform the following: To recall the memory settings for driver one or position (do not start the engine). two, push the desired memory button number 1.

  • Page 33: Manual Adjustment (Rear Seats)

    GETTING TO KNOW YOUR VEHICLE After releasing the seatback, it can be folded When the seatback is folded to the upright ANUAL DJUSTMENT EATS forward. position, make sure it is latched by strongly Folding Rear Seat pulling on the top of the seatback above the seat strap.

  • Page 34: Power Adjustment (Front Seats)

    GETTING TO KNOW YOUR VEHICLE Adjusting The Seat Forward Or Rearward OWER DJUSTMENT RONT EATS WARNING! The seat can be adjusted both forward and Your vehicle may be equipped with eight-way Adjusting a seat while driving may be  rearward by using the power seat switch. The power driver and front passenger seats.
  • Page 35 GETTING TO KNOW YOUR VEHICLE Power Lumbar — If Equipped Easy Entry/Exit Seat — If Equipped WARNING! Vehicles equipped with power driver or This feature provides automatic driver seat Adjusting a seat while driving may be  passenger seats may also be equipped with positioning to enhance driver mobility when dangerous.

  • Page 36: Heated Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE When enabled in Uconnect Settings, Easy Entry Press the heated seat button once to turn  WARNING! (Continued) and Easy Exit positions are stored in each the HI setting on. memory setting profile Ú page 29. Do not place anything on the seat or seat- ...
  • Page 37 GETTING TO KNOW YOUR VEHICLE You can choose from HI, LO, or OFF heat NOTE: WARNING! settings. Amber indicator lights in each switch Once a heat setting is selected, heat will be  Persons who are unable to feel pain to the indicate the level of heat in use.

  • Page 38: Front Ventilated Seats

    GETTING TO KNOW YOUR VEHICLE — The RHR will automatically return to their RONT ENTILATED EATS WARNING! normal position following a rear impact. If the QUIPPED All occupants, including the driver, should RHR do not return to their normal position, see ...
  • Page 39 GETTING TO KNOW YOUR VEHICLE To raise the head restraint, pull upward on the WARNING! WARNING! head restraint. To lower the head restraint, A loose head restraint thrown forward in a push the adjustment button located at the base ALL the head restraints MUST be reinstalled ...

  • Page 40: Mirrors

    GETTING TO KNOW YOUR VEHICLE The Automatic Dimming feature can be turned LLUMINATED ANITY IRRORS WARNING! (Continued) on or off through the Uconnect system To access an illuminated vanity mirror, flip down Ú page 144. ALL the head restraints MUST be rein- ...

  • Page 41: Outside Mirrors

    GETTING TO KNOW YOUR VEHICLE 3. Pivot the sun visor toward the side window. Three of the LEDs are turn signal indicators, WARNING! which flash with the corresponding turn signal 4. Extend the sun visor for additional sun Vehicles and other objects seen in an outside lights in the front and rear of the vehicle.

  • Page 42: Power Folding Outside Mirrors

    GETTING TO KNOW YOUR VEHICLE — Using the mirror control switch, push on any of OWER OLDING UTSIDE IRRORS the four arrows for the direction that you want QUIPPED the mirror to move. If equipped with power folding mirrors, they can be electrically folded rearward and unfolded into the drive position.

  • Page 43: Heated Mirrors - If Equippe

    GETTING TO KNOW YOUR VEHICLE UNIVERSAL GARAGE DOOR OPENER — I NOTE: EATED IRRORS QUIPPED The Automatic Fold/Unfold Mirrors feature can (HOMELINK®) These mirrors are heated to melt be turned on and off using the Uconnect system frost or ice. This feature will be Ú...

  • Page 44: Before You Begin Programming

    GETTING TO KNOW YOUR VEHICLE ® To operate HomeLink®, push and release Rolling Code Devices  RASING any of the programmed HomeLink® buttons. HANNELS To determine if your device has a rolling code, a These buttons will activate the devices they good indicator is its manufacturing date.

  • Page 45: Programming Homelink® To A Garage

    GETTING TO KNOW YOUR VEHICLE ® T 4. Continue to hold both buttons and observe 2. Return to the vehicle and push the ROGRAMMING the HomeLink® indicator light. The programmed HomeLink® button three ARAGE PENER HomeLink® indicator light will flash slowly times (holding the button for two seconds To program any of the HomeLink®...

  • Page 46: Programming Homelink® To A Miscellaneous Device

    GETTING TO KNOW YOUR VEHICLE enough for HomeLink® to pick up the signal ANADIAN PERATOR WARNING! during programming. Similar to this Canadian ROGRAMMING Your motorized door or gate will open and law, some U.S. gate operators are designed to  For programming transmitters in Canada/ close while you are programming the time-out in the same manner.

  • Page 47: Exterior Lights

    GETTING TO KNOW YOUR VEHICLE EXTERIOR LIGHTS two seconds until HomeLink® has If you unplugged the garage door opener/ successfully accepted the frequency signal. device for programming, plug it back in at this The indicator light will flash slowly and then time.

  • Page 48: Multifunction Lever

    GETTING TO KNOW YOUR VEHICLE For vehicles sold in Canada, rotate the headlight NOTE: switch clockwise from the parking light and For vehicles sold in Canada, the Daytime  instrument panel light position to the AUTO Running Lights will automatically deactivate position for automatic headlights.

  • Page 49: Flash-To-Pass

    GETTING TO KNOW YOUR VEHICLE vehicle specific light and automatically switches LASH ARKING IGHTS from high beams to low beams until the You can signal another vehicle with your To turn on the parking lights and instrument approaching vehicle is out of view. headlights by lightly pulling the multifunction panel lights, rotate the headlight switch NOTE:...

  • Page 50: Adaptive Bi-Xenon High Intensity Discharge

    GETTING TO KNOW YOUR VEHICLE — I DAPTIVE ENON NTENSITY EADLIGHT ELAY IGHTS QUIPPED — ISCHARGE EADLIGHTS To assist when exiting the vehicle, the headlight The front fog light switch is built into the QUIPPED delay feature will leave the headlights on for up headlight switch.

  • Page 51: Turn Signals

    GETTING TO KNOW YOUR VEHICLE — I To activate the front fog lights, turn on the HANGE SSIST QUIPPED parking lights or the low beam headlights and Lightly push the multifunction lever up or down, push the headlight switch. To turn off the front without moving beyond the detent, and the turn fog lights, either push the headlight switch a signal will flash three times then automatically...
  • Page 52 GETTING TO KNOW YOUR VEHICLE Each light can be turned on by pushing a switch on either side of the console. These buttons are backlit for night time visibility. To turn the lights off, push the switch a second time. The lights will also turn on when the unlock button on the key fob is pushed.

  • Page 53: Windshield Wipers And Washers

    GETTING TO KNOW YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer controls are located on the multifunction lever on the left side of the steering column. The front wipers are operated by rotating a switch, located on the end of the lever. Instrument Panel Dimmer Control Windshield Wiper Operation Intermittent Wipers...

  • Page 54: Rain Sensing Wipers - If Equipped

    GETTING TO KNOW YOUR VEHICLE Windshield Washers NOTE: CAUTION! (Continued) The Mist feature does not activate the washer To use the washer, push the multifunction lever pump; therefore, no washer fluid will be sprayed Always remove any buildup of snow that ...

  • Page 55: Climate Controls

    GETTING TO KNOW YOUR VEHICLE NOTE: Transmission In NEUTRAL Position — When UTOMATIC LIMATE ONTROL  the ignition is ON, and the automatic trans- ESCRIPTIONS UNCTIONS The Rain Sensing feature will not operate  mission is in the NEUTRAL position, the Rain when the wiper switch is in the low or Sensing system will not operate until the high-speed position.
  • Page 56 GETTING TO KNOW YOUR VEHICLE A/C Button Auto Button temperature settings for best windshield and side window defrosting and defogging. When Press and release this button on the Set your desired temperature and toggling the front defrost mode button, the touchscreen, or push the button on press AUTO.
  • Page 57 GETTING TO KNOW YOUR VEHICLE Do not use scrapers, sharp instruments, or SYNC Button Faceplate  abrasive window cleaners on the interior Press the SYNC button on the The blower speed increases as you turn the surface of the window. touchscreen to toggle the SYNC blower control knob clockwise from the lowest feature on/off.

  • Page 58: Automatic Temperature Control (Atc)

    GETTING TO KNOW YOUR VEHICLE Panel Mode Floor Mode UTOMATIC EMPERATURE ONTROL (ATC) Air comes from the outlets in the Air comes from the floor outlets. A instrument panel. Each of these slight amount of air is directed Automatic Operation outlets can be individually adjusted to through the defrost and side window direct the flow of air.

  • Page 59: Climate Voice Commands

    GETTING TO KNOW YOUR VEHICLE NOTE: Summer Operation LIMATE OICE OMMANDS The engine cooling system must be protected It is not necessary to change the temperature Adjust vehicle temperatures hands-free and  with a high-quality antifreeze coolant to provide settings for cold or hot vehicles. The system keep everyone comfortable while you keep proper corrosion protection and to protect automatically adjusts the temperature,...
  • Page 60 GETTING TO KNOW YOUR VEHICLE Window Fogging Operating Tips Chart CONTROL WEATHER Vehicle windows tend to fog on the inside in SETTINGS CONTROL WEATHER mild, rainy, and/or humid weather. To clear the SETTINGS Operate in windows, select Defrost or Mix mode and Cool Sunny (Bi-Level Mode) Set the mode control...

  • Page 61: Interior Storage And Equipment

    GETTING TO KNOW YOUR VEHICLE INTERIOR STORAGE AND EQUIPMENT Door Storage WARNING! The door panels contain storage areas. TORAGE Do not operate this vehicle with a glove Console Features compartment in the open position. Driving Glove Compartment with the glove compartment open may result Two separate storage compartments are The glove compartment is located on the in injury in a collision.
  • Page 62 GETTING TO KNOW YOUR VEHICLE Inside the center console armrest, there is a Sunglasses Bin Door WARNING! removable upper storage tray that can be slid At the front of the console, a compartment is forward/rearward on rails for access to the Do not operate this vehicle with a console provided for the storage of a pair of sunglasses.

  • Page 63: Usb/Aux Control

    GETTING TO KNOW YOUR VEHICLE USB/AUX C Located on the rear of the front center console ONTROL are dual USB “Charge Only” ports. The USB This feature allows an external USB device to be “Charge Only” ports will recharge battery plugged into the USB port.

  • Page 64: Heated And Cooled Cupholders

    GETTING TO KNOW YOUR VEHICLE — If the sunshade is in the raised position and the EATED OOLED UPHOLDERS WARNING! vehicle is placed in REVERSE, the sunshade will QUIPPED When using the cupholder in the “Hot” automatically fully lower. When the Your vehicle may be equipped with heated and position, avoid contact with the heated transmission is shifted out of REVERSE the...

  • Page 65: Power Outlets

    GETTING TO KNOW YOUR VEHICLE NOTE: The front power outlet is located inside the In addition to the front power outlet, there is The rear sunshade control switch can be locked storage area on the center stack of the also a power outlet located in the storage area out along with the rear passenger window instrument panel.
  • Page 66 GETTING TO KNOW YOUR VEHICLE The instrument panel power outlet and dual WARNING! CAUTION! (Continued) rear console USB ports can be changed to “battery” powered at all times by moving the To avoid serious injury or death: Accessories that draw higher power (i.e., ...

  • Page 67: Windows

    GETTING TO KNOW YOUR VEHICLE WINDOWS NOTE: UTOMATIC INDOW EATURES The power window switches will remain active Auto-Down Feature OWER INDOW ONTROLS for up to 10 minutes after the ignition is placed in the OFF position. Opening either front door The driver and front passenger door power The window controls on the driver's door control will cancel this feature.

  • Page 68: Reset Auto-Up

    GETTING TO KNOW YOUR VEHICLE If the window runs into any obstacle during ESET auto-closure, it will reverse direction and then Should the Auto-Up feature stop working, the go back down. Remove the obstacle and use window may need to be reset. To reset Auto-Up: the window switch again to close the window.

  • Page 69: Panoramic Sunroof - If Equipped

    GETTING TO KNOW YOUR VEHICLE PANORAMIC SUNROOF — IF EQUIPPED PENING LOSING UNROOF WARNING! Express Open/Close The Panoramic sunroof switch is located to the Never leave children unattended in a  left between the sun visors on the overhead vehicle, or with access to an unlocked Push the switch rearward and release it within console.

  • Page 70: Pinch Protect Feature

    GETTING TO KNOW YOUR VEHICLE To close the shade, push and hold the switch in INCH ROTECT EATURE PENING LOSING OWER the forward position. HADE This feature will detect an obstruction in the Any release of the switch will stop the closing of the sunroof during the Express Close Express Open/Close movement and the shade will remain in a...

  • Page 71: Hood

    GETTING TO KNOW YOUR VEHICLE HOOD CAUTION! PENING To prevent possible damage, do not slam the hood to close it. Lower hood to approximately To open the hood, two latches must be 12 inches (30 cm) and drop the hood to released.

  • Page 72: Closing The Trunk

    GETTING TO KNOW YOUR VEHICLE With the ignition in the OFF position, the trunk RUNK AFETY open symbol will display until the trunk is Trunk Emergency Release closed. As a security measure, a trunk internal Power Trunk Release Button emergency release lever is built into the trunk The trunk can be opened from inside latching mechanism.

  • Page 73: Cargo Area Features

    GETTING TO KNOW YOUR VEHICLE WARNING! WARNING! WARNING! (Continued) Do not allow children to have access to the Be certain that the seatback is securely The weight and position of cargo and  locked into position. If the seatback is not trunk, either by climbing into the trunk from passengers can change the vehicle center of outside, or through the inside of the vehicle.

  • Page 74: Load Leveling System - If Equipped

    GETTING TO KNOW YOUR VEHICLE Trunk Mat — If Equipped CAUTION! A trunk mat covers the bottom of the cargo Do not exceed the maximum weight limit area. The trunk mat is used to protect the 50 lbs (22 kg) of the grocery bag hook. interior of the trunk from mud, snow, and Damage may occur to hook and mounting debris.

  • Page 75: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Instrument Cluster For 3.6L Engine...
  • Page 76 GETTING TO KNOW YOUR INSTRUMENT PANEL Instrument Cluster For 5.7L Engine...

  • Page 77: Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: NSTRUMENT LUSTER ESCRIPTIONS WARNING! The warning / indicator Lights will briefly illumi- 1. Tachometer A hot engine cooling system is dangerous. nate for a bulb check when the ignition is first Indicates the engine speed in revolutions You or others could be badly burned by steam cycled.

  • Page 78: Location And Controls

    GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: OCATION ONTROLS The instrument cluster display features an Holding the up / down or left / right  interactive display which is located in the arrow button will loop the user through the instrument cluster.

  • Page 79: Engine Oil Life Reset

    GETTING TO KNOW YOUR INSTRUMENT PANEL Pushing the OK button makes the selection. buttons. To reset the oil change indicator  5. Push and release the up or down A confirmation screen will appear, returning system (after performing the scheduled arrow button to exit the submenu screen.

  • Page 80: Instrument Cluster Display Selectable Menu Items

    GETTING TO KNOW YOUR INSTRUMENT PANEL Oil Life Adaptive Cruise Control Ready NSTRUMENT LUSTER ISPLAY  ELECTABLE TEMS When ACC is activated but the vehicle speed Battery Voltage  setting has not been selected, the display will Push and release the up or down arrow AWD Status —...
  • Page 81 GETTING TO KNOW YOUR INSTRUMENT PANEL LaneSense — If Equipped Ú page 127 Average Fuel Economy (MPG, L/100 km, or Hold the OK button to reset feature information.  km/L). The instrument cluster display displays the Audio current LaneSense system settings. The Lower end of gauge will be displayed in an ...
  • Page 82 GETTING TO KNOW YOUR INSTRUMENT PANEL 1. Upper Left Trip A Distance 4. Current Gear  Compass  Trip B Distance   Outside Temp  None   Time  5. Odometer 3. Center Range to Empty  Show Menu Title ...

  • Page 83: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped

    GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE: the capability of the charging system. The ATTERY AVER ATTERY AVER charging system is still functioning properly. — E ESSAGE LECTRICAL The charging system is independent from  — I load reduction. The charging system Turning on all possible vehicle electrical EDUCTION CTIONS...

  • Page 84: Programmable Features

    GETTING TO KNOW YOUR INSTRUMENT PANEL What to do when an electrical load reduction ROGRAMMABLE EATURES ARNING IGHTS action message is present (“Battery Saver On” Air Bag Warning Light The instrument cluster display can be used to or “Battery Saver Mode”) view or change the following settings.
  • Page 85 GETTING TO KNOW YOUR INSTRUMENT PANEL indicates a possible brake hydraulic system NOTE: WARNING! malfunction or that a problem with the Brake This light shows only that the parking brake is Booster has been detected by the Anti-Lock Driving a vehicle with the red brake light on is applied.
  • Page 86 GETTING TO KNOW YOUR INSTRUMENT PANEL Door Open Warning Light Electronic Throttle Control (ETC) Warning If the light continues to flash when the vehicle is running, immediate service is required and you Light This indicator will illuminate when a may experience reduced performance, an door is ajar/open and not fully closed.

  • Page 87: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL If the light turns on while driving, safely pull over Oil Temperature Warning Light CAUTION! and stop the vehicle. If the Air Conditioning This warning light will illuminate to (A/C) system is on, turn it off. Also, shift the Continuous driving with the Transmission indicate the engine oil temperature is transmission into NEUTRAL and idle the vehicle.
  • Page 88 GETTING TO KNOW YOUR INSTRUMENT PANEL Anti-Lock Brake System (ABS) Warning activated. It should go out with the engine Each time the ignition is turned to ON/RUN or running. If the ESC Indicator Light comes on ACC/ON/RUN, the ESC system will be on, even Light continuously with the engine running, a if it was turned off previously.
  • Page 89 GETTING TO KNOW YOUR INSTRUMENT PANEL Low Fuel Warning Light Certain conditions, such as a loose or missing CAUTION! gas cap, poor quality fuel, etc., may illuminate When the fuel level reaches the light after engine start. The vehicle should Prolonged driving with the Malfunction approximately 1.9 gal (7.13 L), this be serviced if the light stays on through several...
  • Page 90 GETTING TO KNOW YOUR INSTRUMENT PANEL Tire Pressure Monitoring System (TPMS) vehicle has tires of a different size than the size Your vehicle has also been equipped with a indicated on the vehicle placard or tire inflation TPMS malfunction indicator to indicate when Warning Light pressure label, you should determine the the system is not operating properly.

  • Page 91: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL LaneSense Indicator Light — If Equipped REEN NDICATOR IGHTS CAUTION! The LaneSense indicator light Adaptive Cruise Control (ACC) Set Without The TPMS has been optimized for the original illuminates solid green when both Target Vehicle Light — If Equipped equipment tires and wheels.

  • Page 92: White Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL ONBOARD DIAGNOSTIC SYSTEM — OBD II NOTE: LaneSense Indicator Light — If Equipped When the LaneSense system is ON, A continuous chime will sound if the vehicle is  Your vehicle is equipped with a sophisticated but not armed, the LaneSense driven more than 1 mile (1.6 km) with either Onboard Diagnostic system called OBD II.

  • Page 93: Onboard Diagnostic System (Obd Ii)

    GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND CAUTION! WARNING! MAINTENANCE PROGRAMS Prolonged driving with the MIL on could ONLY an authorized service technician   cause further damage to the emission should connect equipment to the OBD II In some localities, it may be a legal requirement control system.
  • Page 94 GETTING TO KNOW YOUR INSTRUMENT PANEL Your vehicle has a simple ignition actuated test, 3. Approximately 15 seconds later, one of two If your OBD II system is not ready, you should which you can use prior to going to the test things will happen: see an authorized dealer or repair facility.

  • Page 95: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE WARNING! (Continued) CAUTION! Before starting your vehicle, adjust your seat, Shift into or out of PARK or REVERSE only Do not leave the key fob in or near the   adjust the inside and outside mirrors, fasten after the vehicle has come to a complete vehicle (or in a location accessible to chil- your seat belt, and if present, instruct all other...

  • Page 96: Normal Starting

    STARTING AND OPERATING To Turn Off The Engine Using ENGINE START/ NOTE: ORMAL TARTING STOP Button If the gear selector is not in PARK, and the To Turn On The Engine Using The ENGINE ENGINE START/STOP button is pushed once 1.

  • Page 97: Autopark

    STARTING AND OPERATING 3. Push the ENGINE START/STOP button a If the vehicle is not in PARK and the driver turns WARNING! second time to place the ignition to the RUN off the engine, the vehicle may AutoPark. mode. Driver inattention could lead to failure to ...

  • Page 98: Cold Weather Operation (Below -22°F Or −30°C)

    STARTING AND OPERATING If the vehicle is not in PARK and the driver exits If the driver shifts into PARK while moving, the EATHER PERATION the vehicle with the engine running, the vehicle vehicle may AutoPark. –22°F O −30°C) ELOW may AutoPark.

  • Page 99: After Starting

    STARTING AND OPERATING ENGINE BREAK-IN RECOMMENDATIONS FTER TARTING WARNING! (Continued) The idle speed is controlled automatically, and A long break-in period is not required for the Do not attempt to push or tow your vehicle  it will decrease as the engine warms up. drivetrain (engine, transmission, and rear axle) to get it started.

  • Page 100: Parking Brake

    STARTING AND OPERATING When parking on a hill, it is important to turn the CAUTION! front wheels toward the curb on a downhill Never use Non-Detergent Oil or Straight grade and away from the curb on an uphill Mineral Oil in the engine or damage may grade.

  • Page 101: Automatic Transmission

    STARTING AND OPERATING CAUTION! WARNING! (Continued) WARNING! (Continued) If the Brake Warning Light remains on with When exiting the vehicle, always make sure The transmission may not engage PARK if   the keyless ignition node is in the OFF the parking brake released, a brake system the vehicle is moving.

  • Page 102: Ignition Park Interlock

    STARTING AND OPERATING the transmission in PARK. This system also WARNING! (Continued) WARNING! (Continued) locks the transmission in PARK whenever the ignition is in the OFF mode. Unintended movement of a vehicle could Do not leave the key fob in or near the ...
  • Page 103 STARTING AND OPERATING the instrument cluster. To select a gear range, Only shift from DRIVE to PARK or REVERSE Premium Gear Selector With AutoStick simply rotate the gear selector. To access the L or when the accelerator pedal is released and the The premium transmission gear selector S position, push down on the gear selector and vehicle is stopped.
  • Page 104 STARTING AND OPERATING PARK (P) WARNING! WARNING! (Continued) This range supplements the parking brake by Never use the PARK position as a substi- It is dangerous to shift out of PARK or   locking the transmission. The engine can be tute for the parking brake.
  • Page 105 STARTING AND OPERATING The following indicators should be used to CAUTION! WARNING! (Continued) ensure that you have properly engaged the transmission into the PARK position: Towing the vehicle, coasting, or driving for any Never leave children alone in a vehicle, or ...
  • Page 106 STARTING AND OPERATING During extremely cold temperatures (-22°F condition is detected that could result in 3. Push and hold the ignition switch until the [-30°C] or below), transmission operation may transmission damage, Transmission Limp engine turns off. be modified depending on engine and Home Mode is activated.
  • Page 107 STARTING AND OPERATING This system can also provide you with more If AutoStick is engaged while the transmis-  control during passing, city driving, cold slippery sion gear selector is in the SPORT position, manual gear selection will be maintained conditions, mountain driving, trailer towing, and until the gear selector is returned to DRIVE, or many other situations.

  • Page 108: Sport Mode - If Equipped

    STARTING AND OPERATING SPORT MODE — IF EQUIPPED FUEL SAVER TECHNOLOGY 5.7L ONLY — Holding the (-) paddle pressed will downshift  the transmission to the lowest gear possible IF EQUIPPED at the current speed. This feature offers improved fuel economy by Transmission shifting will be more noticeable ...

  • Page 109: Cruise Control Systems - If Equipped

    STARTING AND OPERATING Alternate electric power steering efforts can be power steering system. Once driving conditions are The Cruise Control buttons are located on the selected through the Uconnect system safe, pull over and let the vehicle idle for a few right side of the steering wheel.
  • Page 110 STARTING AND OPERATING To Activate To Set A Desired Speed U.S. Speed (mph) Push the on/off button to activate the Cruise Turn the Cruise Control on. When the vehicle Pushing the SET (+), or SET (-) button once  Control. “CRUISE CONTROL READY” will appear has reached the desired speed, push and will result in a 1 mph speed adjustment.

  • Page 111: Adaptive Cruise Control (Acc) - If Equipped

    STARTING AND OPERATING (ACC) — To Accelerate For Passing To Resume Speed DAPTIVE RUISE ONTROL Press the accelerator as you would normally. To resume a previously set speed, push the RES QUIPPED When the pedal is released, the vehicle will button and release.
  • Page 112 STARTING AND OPERATING Any chassis/suspension or tire size modifica-  WARNING! (Continued) WARNING! (Continued) tions to the vehicle will affect the perfor- mance of the Adaptive Cruise Control and The ACC system: You should switch off the ACC system:  Forward Collision Warning systems.
  • Page 113 STARTING AND OPERATING Adaptive Cruise Control (ACC) Operation Adaptive Cruise Control (ACC) Menu System Off  The buttons on the right side of the steering The instrument cluster display will show the ACC Proximity Warning  wheel operate the ACC system. current ACC system settings.
  • Page 114 STARTING AND OPERATING When the vehicle speed is below the  WARNING! WARNING! minimum speed range Leaving the Adaptive Cruise Control (ACC) In the Normal (Fixed Speed) Cruise Control When the brakes are overheated  system on when not in use is dangerous. You mode, the system will not react to vehicles could accidentally set the system or cause it ahead.
  • Page 115 STARTING AND OPERATING NOTE: The Electronic Stability Control/Traction Resume can be used at any speed above  Control System (ESC/TCS) activates 20 mph (32 km/h) when only Fixed Speed Keeping your foot on the accelerator pedal  Cruise Control is being used. can cause the vehicle to continue to accel- The vehicle parking brake is applied ...
  • Page 116 STARTING AND OPERATING U.S. Speed (mph) NOTE: The ACC will bring the vehicle to a complete  stop while following a vehicle in front and When you override and push the SET (+) button Pushing the SET (+), or SET (-) button once ...
  • Page 117 STARTING AND OPERATING Setting The Following Distance In ACC To increase the distance setting, push the The maximum braking applied by ACC is limited; Distance Setting Increase button and release. however, the driver can always apply the brakes The specified following distance for ACC can be Each time the button is pushed, the distance manually, if necessary.
  • Page 118 STARTING AND OPERATING signal (Lane Change Assist feature included) This message can sometimes be displayed WARNING! and will only be active when passing on the left while driving in highly reflective areas (i.e. ice hand side. Switching lanes will not impact the When the ACC system is resumed, the driver and snow, or tunnels with reflective tiles).
  • Page 119 STARTING AND OPERATING If the sensor or front end of the vehicle is “Clean Front Windshield” Warning When the condition that created limited  damaged due to a collision, see an autho- functionality is no longer present, the system The “ACC/FCW Limited Functionality Clean rized dealer for service.
  • Page 120 STARTING AND OPERATING stay alert and may need to intervene. The Turns And Bends Using ACC On Hills following are examples of these types of When driving on a curve with ACC engaged, the When driving on hills, ACC may not detect a situations: system may decrease the vehicle speed and vehicle in your lane.
  • Page 121 STARTING AND OPERATING Lane Changing Narrow Vehicles Stationary Objects And Vehicles ACC may not detect a vehicle until it is Some narrow vehicles traveling near the outer ACC does not react to stationary objects and edges of the lane or edging into the lane are not stationary vehicles.

  • Page 122: Parksense Front And Rear Park Assist - If Equipped

    STARTING AND OPERATING PARKSENSE FRONT AND REAR PARK ASSIST ParkSense can be active only when the gear The six ParkSense sensors, located in the front selector is in REVERSE or DRIVE. If ParkSense fascia/bumper, monitor the area in front of the —...
  • Page 123 STARTING AND OPERATING If an obstacle is detected in the center rear If an obstacle is detected in the center front If an obstacle is detected in the left and/or right region, the display will show a single solid arc in region, the display will show a single arc in the front region, the display will show a single the center rear region and will produce a...
  • Page 124 STARTING AND OPERATING Front/Rear ParkSense Arcs 1 — No Tone/Solid Arc 6 — Fast Tone/Flashing Arc 2 — No Tone/Flashing Arc 7 — Fast Tone/Flashing Arc 3 — Fast Tone/Flashing Arc 8 — Slow Tone/Solid Arc 4 — Continuous Tone/Flashing Arc 9 —...
  • Page 125 STARTING AND OPERATING The vehicle is close to the obstacle when the instrument cluster display shows one flashing arc and sounds a continuous tone. The following charts show the warning alert operation when the system is detecting an obstacle: WARNING ALERTS FOR REAR Less than Greater than Rear Distance...

  • Page 126: Parksense Warning Display

    STARTING AND OPERATING WARNING ALERTS FOR FRONT Front Distance Greater than 47 inches 47-39 inches 39-25 inches 25-12 inches Less than 12 inches (inches/cm) (120 cm) (120-100 cm) (100-65 cm) (65-30 cm) (30 cm) Arcs — Left None None None 3rd Flashing 4th Flashing Arcs —...

  • Page 127: Enabling And Disabling Parksense

    STARTING AND OPERATING FRONT SENSORS", or the "PARKSENSE the underside of the rear fascia/bumper and/or NABLING ISABLING ENSE UNAVAILABLE SERVICE REQUIRED" message front fascia/bumper is clean and clear of snow, ParkSense can be enabled and for five seconds. When the gear selector is ice, mud, dirt or other obstruction and then disabled with the ParkSense switch.
  • Page 128 STARTING AND OPERATING When you turn ParkSense off, the instru- Use the ParkSense switch to turn the Park-   WARNING! (Continued) ment cluster will display “PARKSENSE OFF.” Sense system off if objects such as bicycle Once you turn ParkSense off, it remains off carriers, trailer hitches, etc.

  • Page 129: Lanesense - If Equipped

    STARTING AND OPERATING When both lane markings are detected and the system will cancel if the driver does not return CAUTION! driver unintentionally drifts out of the lane (no their hands to the wheel. ParkSense is only a parking aid and it is turn signal applied), the LaneSense system ...
  • Page 130 STARTING AND OPERATING Premium Instrument Cluster Display When the LaneSense system senses the lane Left Lane Departure — Both Lanes Detected  has been approached and is in a lane depar- When the LaneSense system is on, the lane When the LaneSense system is on, the lane ...

  • Page 131: Changing Lanesense Status

    STARTING AND OPERATING When the LaneSense system senses a lane time torque is applied to the steering wheel in NOTE:  drift situation, the left thick lane line and left the opposite direction of the lane boundary. When enabled, the system operates above ...
  • Page 132 STARTING AND OPERATING Manual Activation Of The Rear View Camera When the vehicle is shifted out of REVERSE When enabled, active guidelines are overlaid on (with Camera Delay turned off), the rear camera the image to illustrate the width of the vehicle 1.

  • Page 133: Refueling The Vehicle

    STARTING AND OPERATING REFUELING THE VEHICLE NOTE: CAUTION! In certain cold conditions, ice may prevent the To avoid vehicle damage, ParkView should fuel door from opening. If this occurs, lightly 1. Push the fuel filler door release switch  only be used as a parking aid. The ParkView push on the fuel door to break the ice buildup (located in the driver's door map pocket).

  • Page 134: Emergency Fuel Filler Door Release

    STARTING AND OPERATING 3. Pull the release cable. MERGENCY ILLER WARNING! ELEASE Never have any smoking materials lit in or  If you are unable to open the fuel filler door, use near the vehicle when the fuel door is open the fuel filler door emergency release located in or the tank is being filled.

  • Page 135: Vehicle Certification Label

    STARTING AND OPERATING (GAWR) Figure out the weight on the front and rear of EHICLE ERTIFICATION ABEL ROSS EIGHT ATING the vehicle separately. It is important that you Your vehicle has a Vehicle Certification Label The GAWR is the maximum capacity of the front distribute the load evenly over the front and rear affixed to the drivers side B-pillar or the rear of and rear axles.

  • Page 136: Trailer Towing

    STARTING AND OPERATING NOTE: Gross Vehicle Weight Rating (GVWR) Gross Axle Weight Rating (GAWR) The GVWR is the total allowable weight of your The GAWR is the maximum capacity of the front Refer to the “Vehicle Certification Label”  vehicle. This includes driver, passengers, cargo and rear axles.
  • Page 137 STARTING AND OPERATING Trailer Sway Control Weight-Distributing Hitch WARNING! The Trailer Sway Control (TSC) can be a A weight-distributing system works by applying An improperly adjusted Weight Distributing  mechanical telescoping link that can be leverage through spring (load) bars. They are Hitch system may reduce handling, installed between the hitch receiver and the typically used for heavier loads to distribute...

  • Page 138: Trailer Hitch Classification

    STARTING AND OPERATING RAILER ITCH LASSIFICATION The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.

  • Page 139: Trailer And Tongue Weight

    STARTING AND OPERATING part of the total load on your vehicle. Refer to RAILER ONGUE EIGHT WARNING! (Continued) the “Tire And Loading Information” placard for Never exceed the maximum tongue weight the maximum combined weight of occupants Safety chains must always be used ...
  • Page 140 STARTING AND OPERATING Perform the maintenance listed in the Check the trailer tires for proper tire inflation  WARNING! pressures before trailer usage. “Scheduled Servicing” Ú page 228. When towing a trailer, never exceed the GAWR or Do not connect trailer brakes to your ...

  • Page 141: Towing Tips

    STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven-pin wiring harness.

  • Page 142: Recreational Towing (Behind Motorhome)

    STARTING AND OPERATING Automatic Transmission AutoStick — If Equipped CAUTION! When using the AutoStick shift control, select Select the DRIVE range when towing. The  Towing this vehicle in violation of the above the highest gear that allows for adequate transmission controls include a drive strategy to requirements can cause severe transmission performance and avoids frequent down-...

  • Page 143: Driving Through Water

    STARTING AND OPERATING ability. To reduce this possibility, the following RIVING HROUGH ATER WARNING! precautions should be observed: Driving through water more than a few inches/ Rapid acceleration on slippery surfaces is Slow down during rainstorms or when the  centimeters deep will require extra caution to dangerous.
  • Page 144 STARTING AND OPERATING Shallow Standing Water CAUTION! CAUTION! (Continued) Although your vehicle is capable of driving Always check the depth of the standing Driving through standing water may cause   through shallow standing water, consider the water before driving through it. Never drive damage to your vehicle’s drivetrain compo- following Warnings and Cautions before doing so.

  • Page 145: Multimedia

    MULTIMEDIA UCONNECT SYSTEMS computer or other devices, your vehicle may WARNING! (Continued) require software updates to improve the usability For detailed information about your Uconnect and performance of your systems or to reduce the As always, if you experience unusual ...

  • Page 146: Uconnect Settings

    MULTIMEDIA Privacy of any wireless and wired Your Uconnect system may also have Screen Press the Apps button, then press the communications cannot be assured. Third Off and Mute buttons on the faceplate. Settings button on the touchscreen to display parties may unlawfully intercept information the menu setting screen.
  • Page 147 MULTIMEDIA Language When the Language button is pressed on the touchscreen, the system displays the different language options. Once an option is selected, the system will display in the chosen language. Setting Name Description This setting will change the language of the Uconnect system. The Language available languages are English, Français, and Español.
  • Page 148 MULTIMEDIA Setting Name Description Touchscreen Beep This setting will allow you to turn the touchscreen beep on or off. This setting will allow you to set the Control Screen to turn off Control Screen Timeout automatically after five seconds or stay open until manually closed. This setting will display navigation prompts in the Instrument Cluster Navigation Next Turn Pop-ups Displayed in Cluster Display.
  • Page 149 MULTIMEDIA Voice When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature. Setting Name Description This setting will change the response length for the Voice Recognition system. The “Brief” setting provides a shortened audio description from Voice Response Length the system.
  • Page 150 MULTIMEDIA Setting Name Description This setting will allow you to set the hours. Sync Time With GPS must be Set Time Hours off for this setting to be available. The “+” setting will increase the hours. The “-” setting will decrease the hours. This setting will allow you to set the minutes.
  • Page 151 MULTIMEDIA Safety & Driving Assistance When the Safety & Driving Assistance button is selected on the touchscreen, the system displays the options related to the vehicle’s safety settings. These options will differ depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a subfolder, select the desired folder;...
  • Page 152 MULTIMEDIA Setting Name Description This setting will change the type of alert provided when an object is detected in a vehicle’s blind spot. The “Off” setting will turn off Blind Spot Blind Spot Alert Alert. The “Lights” setting will activate the Blind Spot Alert lights on the outside mirrors.
  • Page 153 MULTIMEDIA Lights When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights. NOTE: When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned On or Off. This feature is only allowed by law in the country of the vehicle purchased.
  • Page 154 MULTIMEDIA Doors & Locks When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors. Setting Name Description This setting will unlock the doors when any of the doors are opened from Auto Unlock On Exit the inside.
  • Page 155 MULTIMEDIA Seats & Comfort — If Equipped When Seats & Comfort button is pressed on the touchscreen, the system displays the option related to the vehicle’s comfort systems when remote start has been activated or the vehicle has been started. Setting Name Description This setting will activate the vehicle’s comfort system and heated seats (if...
  • Page 156 MULTIMEDIA Audio When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone. Setting Name Description This setting will adjust audio levels from specific speakers in the front/...
  • Page 157 MULTIMEDIA Phone/Bluetooth® When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu. Setting Name Description This setting will activate phone message pop-ups in the Instrument...
  • Page 158 MULTIMEDIA SiriusXM® Setup — If Equipped NOTE: A subscription to SiriusXM® Satellite Radio is required for these settings to be functional. When the SiriusXM® Setup button is pressed on the touchscreen, the system displays options related to SiriusXM® Satellite Radio. These settings can be used to skip specific radio channels and restart favorite songs from the beginning.
  • Page 159 MULTIMEDIA Restore Settings When the Restore Settings button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings. These settings can clear personal data and reset selected settings from other menus. Setting Name Description This setting will return all the previously changed settings to their factory...

  • Page 160: Radio Operation And Mobile Phones

    MULTIMEDIA RADIO OPERATION AND MOBILE PHONES The radio manufacturer believes the internal EGULATORY AFETY wireless radio is safe for use by consumers. The NFORMATION Under certain conditions, the mobile phone level of energy emitted is far less than the being on in your vehicle can cause erratic or USA/CANADA electromagnetic energy emitted by wireless noisy performance from your radio.

  • Page 161: Safety

    SAFETY SAFETY FEATURES You also may experience the following normal WARNING! (Continued) characteristics when the ABS activates: (ABS) RAKE YSTEM Pumping of the Anti-Lock Brakes will  ABS motor noise or clicking sounds (you may  diminish their effectiveness and may lead continue to hear for a short time after the stop).

  • Page 162: Electronic Brake Control (Ebc) System

    SAFETY Anti-Lock Brake System (ABS) Warning Mitigation (ERM), Electronic Stability Control optimum pressure to the brakes. This can help (ESC), Hill Start Assist (HSA), and Traction reduce braking distances. The BAS Light Control System (TCS). These systems work complements the Anti-Lock Brake System The yellow ABS Warning Light will turn on when together to enhance both vehicle stability and (ABS).
  • Page 163 SAFETY Electronic Brake Force Distribution (EBD) NOTE: Oversteer — when the vehicle is turning more  ERM is disabled any time the ESC is in “Full Off” than appropriate for the steering wheel position. EBD manages the distribution of the braking mode (if equipped).
  • Page 164 SAFETY ESC On WARNING! WARNING! (Continued) This is the normal operating mode for the ESC. Electronic Stability Control (ESC) cannot Vehicle modifications, or failure to properly   Whenever the vehicle is started, the ESC system prevent the natural laws of physics from maintain your vehicle, may change the will be in this mode.
  • Page 165 SAFETY features are turned off. To enter the “Full Off” WARNING! WARNING! (Continued) mode, push and hold the ESC OFF button for When in “Partial Off” mode, the TCS five seconds while the vehicle is stopped with The Electronic Stability Control (ESC) ...
  • Page 166 SAFETY The ESC Activation/Malfunction Indicator Light The ESC system will make buzzing or clicking The gear selection must match vehicle uphill   sounds when it is active. This is normal; the direction (i.e., vehicle facing uphill is in starts to flash as soon as the tires lose traction and the ESC system becomes active.
  • Page 167 SAFETY Disabling And Enabling HSA Ready Alert Braking (RAB) WARNING! (Continued) This feature can be turned on or turned off. To RAB may reduce the time required to reach full HSA is not a parking brake. Always apply  change the current setting using Uconnect braking during emergency braking situations.

  • Page 168: Auxiliary Driving Systems

    SAFETY AUXILIARY DRIVING SYSTEMS The BSM system detection zone DOES NOT  change if your vehicle is towing a trailer. (BSM) — Therefore, visually verify the adjacent lane is LIND ONITORING clear for both your vehicle and trailer before QUIPPED making a lane change.
  • Page 169 SAFETY cluster, both mirror lights will illuminate, and The BSM system notifies the driver of objects in Entering From The Rear BSM and RCP alerts will not occur. This is normal the detection zones by illuminating the BSM Vehicles that come up from behind your vehicle operation.
  • Page 170 SAFETY Overtaking Traffic WARNING! If you pass another vehicle slowly with a relative The Blind Spot Monitoring system is only an speed of less than 15 mph (24 km/h) and the aid to help detect objects in the blind spot vehicle remains in the blind spot for zones.
  • Page 171 SAFETY present. Whenever an audible alert is WARNING! requested, the radio is muted. Rear Cross Path Detection (RCP) is not a Blind Spot Alert Lights/Chime backup aid system. It is intended to be used When operating in Blind Spot Alert Lights/ to help a driver detect an oncoming vehicle in Chime mode, the BSM system will provide a a parking lot situation.

  • Page 172: Forward Collision Warning (Fcw) With Mitigation Operation - If Equipped

    SAFETY Blind Spot Alert Off system determines that a forward collision is probable, the driver will be provided with When the BSM system is turned off there will be audible and visual warnings and may provide a no visual or audible alerts from either the BSM brake jerk warning.
  • Page 173 SAFETY It is unsafe to test the FCW system. To And Driving Assistance". Forward Collision can Changing the FCW status to the “Near” setting,  prevent such misuse of the system, after four be checked or unchecked. allows the system to warn you of a possible Active Braking events within an ignition cycle, collision with the vehicle in front of you when When FCW is selected off, there will be an "FCW...

  • Page 174: Tire Pressure Monitoring System (Tpms)

    SAFETY limits FCW functionality. Although the vehicle is The tire pressure will vary with temperature by Warning Light) illuminates, you must increase the still drivable under normal conditions, the active about 1 psi (7 kPa) for every 12°F (6.5°C). This tire pressure to the recommended cold placard braking may not be fully available.
  • Page 175 SAFETY be on. In this situation, the TPMS Warning Light Seasonal temperature changes will affect  CAUTION! (Continued) will turn off only after the tires are inflated to the tire pressure, and the TPMS will monitor the actual tire pressure in the tire. vehicle’s recommended cold placard pressure After inspecting or adjusting the tire pres- ...
  • Page 176 SAFETY Tire Pressure Monitoring Low Pressure (28 kPa) above the recommended cold placard pressure in order to turn the TPMS Warning Warnings Light off. The Tire Pressure Monitoring System (TPMS) Warning Light will illuminate Service Tire Pressure System Warning in the instrument cluster and a chime If a system fault is detected, the Tire Pressure will sound when tire pressure is low in Monitoring System (TPMS) Warning Light will...
  • Page 177 SAFETY Accumulation of snow or ice around the a “Service Tire Pressure System” message TPMS Deactivation — If Equipped  wheels or wheel housings. for five seconds and then display dashes The Tire Pressure Monitoring System (TPMS) (- -) in place of the pressure value. can be deactivated if replacing all four wheel Using tire chains on the vehicle.

  • Page 178: Occupant Restraint Systems

    SAFETY To reactivate the TPMS, replace all four wheel Some of the safety features described in this back as possible and use the proper child and tire assemblies (road tires) with tires section may be standard equipment on some restraint Ú page 193. equipped with TPMS sensors.

  • Page 179: Seat Belt Systems

    SAFETY risk of injury caused by striking the inside of the BeltAlert Warning Sequence WARNING! vehicle. Everyone in a motor vehicle should be The BeltAlert warning sequence is activated Never place a rear-facing child restraint in belted at all times. ...
  • Page 180 SAFETY The outboard front passenger seat BeltAlert is to move freely with you under normal WARNING! (Continued) not active when the outboard front passenger conditions. However, in a collision the seat belt seat is unoccupied. BeltAlert may be triggered will lock and reduce your risk of striking the Do not allow people to ride in any area of ...
  • Page 181 SAFETY Lap/Shoulder Belt Operating Instructions WARNING! WARNING! (Continued) 1. Enter the vehicle and close the door. Sit A lap belt worn too high can increase the A seat belt that is worn under your arm is   back and adjust the seat. risk of injury in a collision.
  • Page 182 SAFETY 3. When the seat belt is long enough to fit, Lap/Shoulder Belt Untwisting Procedure insert the latch plate into the buckle until Use the following procedure to untwist a twisted you hear a “click.” lap/shoulder belt. 1. Position the latch plate as close as possible to the anchor point.
  • Page 183 SAFETY Adjustable Upper Shoulder Belt Anchorage NOTE: WARNING! (Continued) The adjustable upper shoulder belt anchorage In the driver and outboard front passenger is equipped with an Easy Up feature. This Misadjustment of the seat belt could reduce  seats, the top of the shoulder belt can be feature allows the shoulder belt anchorage to the effectiveness of the safety belt in a crash.
  • Page 184 SAFETY Seat belts must be worn by all occupants NOTE: WARNING! (Continued) including pregnant women: the risk of injury in These devices are not a substitute for proper the event of an accident is reduced for the seat belt placement by the occupant. The seat Using a Seat Belt Extender when not needed ...
  • Page 185 SAFETY Switchable Automatic Locking Retractors as the seat belt retracts. Allow the webbing to WARNING! (Continued) retract completely in this case and then (ALR) carefully pull out only the amount of webbing Never install a rear-facing child restraint in  The seat belts in the passenger seating necessary to comfortably wrap around the the front seat of a vehicle.

  • Page 186: Supplemental Restraint Systems (Srs)

    SAFETY The air bag system must be ready to protect you Air Bag Warning Light WARNING! in a collision. The Occupant Restraint Controller The Occupant Restraint Controller The seat belt assembly must be replaced if (ORC) monitors the internal circuits and ...
  • Page 187 SAFETY The ORC also includes diagnostics that will Front Air Bags WARNING! illuminate the instrument panel Air Bag Warning This vehicle has front air bags and lap/shoulder Light if a malfunction is detected that could Ignoring the Air Bag Warning Light in your belts for both the driver and front passenger.
  • Page 188 SAFETY Restraint Controller (ORC), which may receive WARNING! WARNING! (Continued) information from the front impact sensors (if Being too close to the steering wheel or equipped) or other system components. Do not put anything on or around the air  ...
  • Page 189 SAFETY On the other hand, depending on the type and Knee Impact Bolsters Supplemental Side Air Bags location of impact, front air bags may deploy in The Knee Impact Bolsters help protect the Supplemental Seat-Mounted Side Air Bags crashes with little vehicle front-end damage but knees of the driver and front passenger, and (SABs) that produce a severe initial deceleration.
  • Page 190 SAFETY When the SAB deploys, it opens the seam on The SABICs may help reduce the risk of partial the outboard side of the seatback’s trim cover. or complete ejection of vehicle occupants The inflating SAB deploys through the seat through side windows in certain side impact seam into the space between the occupant and events.
  • Page 191 SAFETY severity and type of collision. The side impact WARNING! WARNING! sensors aid the ORC in determining the appropriate response to impact events. The Occupants, including children, who are up Side Air Bags need room to inflate. Do not  ...
  • Page 192 SAFETY Rollover Events Air Bag System Components If A Deployment Occurs Side Air Bags and seat belt pretensioners are The front air bags are designed to deflate NOTE: designed to activate in certain rollover events. immediately after deployment. The Occupant Restraint Controller (ORC) moni- The Occupant Restraint Controller (ORC) tors the internal circuits and interconnecting NOTE:...
  • Page 193 SAFETY eye irritation, rinse the area with cool water. Enhanced Accident Response System Cut off battery power to the:  For nose or throat irritation, move to fresh air. In the event of an impact, if the communication Engine  If the irritation continues, see your doctor.
  • Page 194 SAFETY Enhanced Accident Response System Maintaining Your Air Bag System WARNING! (Continued) Reset Procedure WARNING! Do not attempt to modify any part of your  In order to reset the Enhanced Accident air bag system. The air bag may inflate acci- Modifications to any part of the air bag Response System functions after an event, the ...

  • Page 195: Child Restraints

    SAFETY Event Data Recorder (EDR) These data can help provide a better HILD ESTRAINTS understanding of the circumstances in which This vehicle is equipped with an event data Everyone in your vehicle needs to be buckled up crashes and injuries occur. recorder (EDR).
  • Page 196 SAFETY There are different sizes and types of restraints Before buying any restraint system, make sure NOTE: for children from newborn size to the child that it has a label certifying that it meets all For additional information, refer to http:// ...
  • Page 197 SAFETY Infant And Child Restraints Older Children And Child Restraints WARNING! Safety experts recommend that children ride Children who are two years old or who have Never place a rear-facing child restraint in  rear-facing in the vehicle until they are two years outgrown their rear-facing convertible child seat front of an air bag.
  • Page 198 SAFETY Children Too Large For Booster Seats If the answer to any of these questions was WARNING! “no,” then the child still needs to use a booster Children who are large enough to wear the Improper installation can lead to failure of seat in this vehicle.
  • Page 199 SAFETY Recommendations For Attaching Child Restraints Use Any Attachment Method Shown With An “X” Below Combined Weight of LATCH – Lower Restraint Type the Child + Child LATCH – Lower Seat Belt + Top Seat Belt Only Anchors + Top Restraint Anchors Only Tether Anchor...
  • Page 200 SAFETY Lower Anchors And Tethers For CHildren Your vehicle is equipped with the child restraint LATCH Positions For Installing Child anchorage system called LATCH, which stands (LATCH) Restraint System Restraints In This Vehicle for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH-equipped child seats.
  • Page 201 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined weight of the child and the child What is the weight limit (child’s weight + weight restraint is 65 lbs (29.5 kg). Use the seat belt of the child restraint) for using the LATCH 65 lbs (29.5 kg) and tether anchor instead of the LATCH system...
  • Page 202 SAFETY Locating The LATCH Anchorages position blocks the outboard LATCH anchors or seat belt, do not install a child seat in that The lower anchorages are round bars outboard position. that are found at the rear of the seat cushion where it meets the seatback, WARNING! below the anchorage symbols on the seatback.
  • Page 203 SAFETY 1. Loosen the adjusters on the lower straps 5. Tighten all of the straps as you push the behind the child restraint, route the seat belt and on the tether strap of the child seat so child restraint rearward and downward into through the child restraint belt path and then that you can more easily attach the hooks the seat.
  • Page 204 SAFETY Installing Child Restraints Using The The seat belts in the passenger seating Lap/Shoulder Belt Systems For Installing positions are equipped with a Switchable Vehicle Seat Belt Child Restraints In This Vehicle Automatic Locking Retractor (ALR) that is Child restraint systems are designed to be designed to keep the lap portion of the seat belt secured in vehicle seats by lap belts or the lap tight around the child restraint so that it is not...
  • Page 205 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Always use the tether anchor when weight + weight of the child using the seat belt to install a restraint) for using the Tether Weight limit of the Child Restraint forward facing child restraint, up to Anchor with the seat belt to attach...
  • Page 206 SAFETY 1. Place the child seat in the center of the 6. Try to pull the webbing out of the retractor. Installing Child Restraints Using The Top seating position. If the second row seat can If it is locked, you should not be able to pull Tether Anchorage: be reclined, you may recline the seat and/or out any webbing.
  • Page 207 SAFETY 2. Rotate or lift the cover to access the anchor 4. Attach the tether strap hook of the child directly behind the seat where you are restraint to the top tether anchorage as placing the child restraint. shown in the diagram. 3.

  • Page 208: Safety Tips

    SAFETY Center Tether Attachment AFETY HECKS HOULD WARNING! NSIDE EHICLE 1. If adjustable, lower the adjustable center Do not leave children or animals inside  head restraint to the full down position. Seat Belts parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.
  • Page 209 SAFETY with the Air Bag System has been detected. It WARNING! WARNING! (Continued) will stay on until the fault is removed. If the light comes on intermittently or remains on while An improperly attached, damaged, folded, or ONLY install floor mats designed to fit your ...

  • Page 210: Periodic Safety Checks You Should Make Outside The Vehicle

    SAFETY Lights WARNING! (Continued) WARNING! (Continued) Have someone observe the operation of brake ONLY use the passenger’s side floor mat on It is recommended to only use mild soap   lights and exterior lights while you work the the passenger’s side floor area. and water to clean your floor mats.

  • Page 211: Exhaust Gas

    SAFETY The best protection against carbon monoxide XHAUST ARBON ONOXIDE ARNINGS entry into the vehicle body is a properly maintained engine exhaust system. WARNING! WARNING! Whenever a change is noticed in the sound of Exhaust gases can injure or kill. They contain Carbon monoxide (CO) in exhaust gases is the exhaust system, when exhaust fumes can carbon monoxide (CO), which is colorless and...

  • Page 212: In Case Of Emergency

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS This is an emergency warning system and it If equipped, the rearview mirror contains an should not be used when the vehicle is in ASSIST and a SOS button. The Hazard Warning Flashers switch is located motion.
  • Page 213 IN CASE OF EMERGENCY your SiriusXM Guardian™ service is active NOTE: 4. You should be able to speak with the SOS and you are connected to an operable LTE In case the SOS Call button is pushed in error, operator through the vehicle audio system (voice/data) or 4G (data) network.
  • Page 214 IN CASE OF EMERGENCY should be able to speak with you or other SOS Call System Limitations WARNING! (Continued) vehicle occupants and hear sounds occurring Vehicles sold in Mexico DO NOT have SOS Call in the vehicle. The vehicle’s SOS Call system The SOS Call system is embedded into the ...
  • Page 215 IN CASE OF EMERGENCY The vehicle battery loses power or becomes NOTE:  WARNING! disconnected during a vehicle crash. Your vehicle may be transmitting data as  Ignoring the Rearview Mirror light could  LTE (voice/data) or 4G (data) network and/or authorized by the subscriber.

  • Page 216: Jacking And Tire Changing

    IN CASE OF EMERGENCY JACKING AND TIRE CHANGING REPARATIONS ACKING 1. Park the vehicle on a firm, level surface. WARNING! Avoid ice or slippery areas. Do not attempt to change a tire on the side  WARNING! of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger Do not attempt to change a tire on the side of of being hit when operating the jack or...

  • Page 217: Jacking And Changinga Tire

    IN CASE OF EMERGENCY 3. Rotate the fastener securing the spare tire 6. Remove the jack and lug wrench assembly WARNING! (Continued) counterclockwise to remove it. from under the spare tire. Turn the jack screw to the left to loosen the lug wrench, Apply the parking brake firmly and set an ...
  • Page 218 IN CASE OF EMERGENCY NOTE: CAUTION! If the vehicle is too low for jack placement, slide Do not attempt to raise the vehicle by jacking the jack on its side and rotate it up into position. on locations other than those indicated in the Jacking Instructions for this vehicle.
  • Page 219 IN CASE OF EMERGENCY NOTE: WARNING! For vehicles so equipped, do not attempt to  Raising the vehicle higher than necessary can install a center cap or wheel cover on the make the vehicle less stable. It could slip off compact spare Ú...

  • Page 220: Jump Starting

    IN CASE OF EMERGENCY 11. Stow the jack, tools and flat tire. Make sure WARNING! the base of the jack faces the front of the vehicle before tightening down the fastener. Do not attempt jump starting if the battery is frozen.

  • Page 221: Jump Starting Procedure

    IN CASE OF EMERGENCY Do not jump off fuses. Only jump directly off 3. If using another vehicle to jump start the TARTING ROCEDURE positive post which has a positive (+) symbol on battery, park the vehicle within the jumper or around the post.
  • Page 222 IN CASE OF EMERGENCY 3. Connect the negative end (-) of the jumper 4. Disconnect the opposite end of the positive CAUTION! cable to the negative (-) post of the booster (+) jumper cable from the remote positive battery. Do not run the booster vehicle engine above (+) post of the discharged vehicle.

  • Page 223: Refueling In An Emergency

    IN CASE OF EMERGENCY REFUELING IN AN EMERGENCY – 3. Ensure funnel is inserted fully to hold flapper doors open. IF EQUIPPED 4. Pour fuel into funnel opening. The vehicle is equipped with a refueling funnel 5. Remove funnel from filler pipe, clean off for a Cap-Less Fuel System.

  • Page 224: If Your Engine Overheats

    IN CASE OF EMERGENCY IF YOUR ENGINE OVERHEATS MANUAL PARK RELEASE WARNING! If the vehicle is overheating, it will need to be You or others can be badly burned by hot WARNING! serviced by an authorized dealer. engine coolant (antifreeze) or steam from Always secure your vehicle by fully applying your radiator.
  • Page 225 IN CASE OF EMERGENCY Follow these steps to use the Manual Park Release: 1. Firmly apply the parking brake. 2. Remove the console storage bin to access the Manual Park Release lever. Engaging The Lever Disengaging The Lever 6. While holding the locking tab in the 2.

  • Page 226: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY FREEING A STUCK VEHICLE NOTE: CAUTION! For vehicles with automatic transmission:  If your vehicle becomes stuck in mud, sand, or Racing the engine or spinning the wheels  Shifts between DRIVE and REVERSE can only snow, it can often be moved using a rocking may lead to transmission overheating and be achieved at wheel speeds of 5 mph...

  • Page 227: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF The Ground RWD MODELS AWD MODELS If transmission is operable: • Transmission in NEUTRAL Flat Tow NONE NOT ALLOWED...

  • Page 228: All Wheel Drive (Awd) Models

    IN CASE OF EMERGENCY Proper towing or lifting equipment is required to CAUTION! CAUTION! (Continued) prevent damage to your vehicle. Use only tow bars and other equipment designed for this Towing this vehicle using any other method When securing the vehicle to a flat bed ...

  • Page 229: Enhanced Accident Response System (Ears)

    IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM EVENT DATA RECORDER (EDR) If the transmission is not operable, or the vehicle must be towed faster than 30 mph (EARS) This vehicle is equipped with an event data (48 km/h) or farther than 30 miles (48 km), recorder (EDR).

  • Page 230: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED SERVICING The “Oil Change Required” message will be Once A Month Or Before A Long Trip: displayed in the instrument cluster and a single Check engine oil level.  This vehicle is equipped with an automatic oil chime will sound, indicating that an oil change change indicator system.

  • Page 231: Maintenance Plan

    SERVICING AND MAINTENANCE AINTENANCE Required Maintenance Intervals: Refer to the maintenance schedules on the following page for the required maintenance intervals. At Every Oil Change Interval As Indicated By Oil Change Indicator System: Change oil and filter  Rotate the tires ...
  • Page 232 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary. Inspect the rear axle fluid. Inspect the front axle fluid (All Wheel Drive Only).
  • Page 233 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change the transfer case fluid; if using your vehicle for any of the following: police, taxi, fleet, off-road, or frequent trailer towing. (All Wheel Drive Only). Change the rear axle fluid and on models equipped with All Wheel Drive (AWD) change the front axle fluid if using your vehicle for any of the following: police, taxi, fleet, off-road, or...

  • Page 234: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L E NGINE 1 — Power Distribution Center (Fuses) 5 — Engine Air Cleaner Filter 2 — Engine Oil Fill 6 — Engine Oil Dipstick 3 — Brake Fluid Reservoir Access Cover 7 — Washer Fluid Reservoir Cap 4 —...

  • Page 235: L Engine

    SERVICING AND MAINTENANCE 5.7L E NGINE 1 — Power Distribution Center (Fuses) 5 — Engine Air Cleaner Filter 2 — Engine Oil Fill 6 — Engine Oil Dipstick 3 — Brake Fluid Reservoir Access Cover 7 — Washer Fluid Reservoir Cap 4 —...

  • Page 236: Checking Oil Level

    SERVICING AND MAINTENANCE Adding 1 quart (1.0 liters) of oil when the The fluid reservoir will hold nearly 1 gallon HECKING EVEL reading is at the low end of the dipstick range (4 liters) of washer fluid when the message To ensure proper engine lubrication, the engine will raise the oil level to the high end of the “Low Washer Fluid”...

  • Page 237: Pressure Washing

    SERVICING AND MAINTENANCE VEHICLE MAINTENANCE WARNING! CAUTION! An authorized dealer has the qualified service Battery fluid is a corrosive acid solution and It is essential when replacing the cables on   personnel, special tools, and equipment to can burn or even blind you. Do not allow the battery that the positive cable is perform all service operations in an expert battery fluid to contact your eyes, skin, or...

  • Page 238: Engine Oil

    SERVICING AND MAINTENANCE American Petroleum Institute (API) Engine Synthetic engine oils which do not have both the NGINE engine oil certification mark and the correct SAE Oil Identification Symbol Engine Oil Selection — 3.6L And 5.7L viscosity grade number should not be used. This symbol means that the oil has Engine Materials Added To Engine Oil...

  • Page 239: Engine Air Cleaner Filter

    SERVICING AND MAINTENANCE Engine Oil Filter Selection Engine Air Cleaner Filter Selection WARNING! (Continued) This manufacturer's engines have a full-flow The quality of replacement engine air cleaner The air conditioning system contains refrig-  type disposable oil filter. Use a filter of this type filters varies considerably.
  • Page 240 SERVICING AND MAINTENANCE NOTE: 1. Remove the access door in the cowl screen 3. Remove the used cabin air filter. Use only manufacturer approved A/C system by pressing the retaining clips. 4. Install the new cabin air filter with arrows PAG compressor oil and refrigerants.

  • Page 241: Accessory Drive Belt Inspection

    SERVICING AND MAINTENANCE Some conditions can be caused by a faulty CCESSORY RIVE NSPECTION component such as a belt pulley. Belt pulleys should be carefully inspected for damage and WARNING! proper alignment. Do not attempt to inspect an accessory  Belt replacement on some models requires the drive belt with vehicle running.

  • Page 242: Windshield Wiper Blades

    SERVICING AND MAINTENANCE The external lock cylinders should be lubricated Wiper Blade Removal/Installation 2. To disengage the wiper blade from the wiper twice a year, preferably in the Autumn and arm, flip up the locking tab. CAUTION! Spring. Apply a small amount of a high quality lubricant, such as Mopar Lock Cylinder Do not allow the wiper arm to spring back Lubricant directly into the lock cylinder.

  • Page 243: Exhaust System

    SERVICING AND MAINTENANCE 4. With the wiper blade disengaged, remove Installing The Front Wipers XHAUST YSTEM the wiper blade from the wiper arm by 1. Lift the wiper arm off of the glass, until the The best protection against carbon monoxide holding the wiper arm with one hand and wiper arm is in the full up position.
  • Page 244 SERVICING AND MAINTENANCE In unusual situations involving grossly WARNING! CAUTION! (Continued) malfunctioning engine operation, a scorching Exhaust gases can injure or kill. They odor may suggest severe and abnormal catalyst Damage to the catalytic converter can result   contain carbon monoxide (CO), which is if your vehicle is not kept in proper operating overheating.

  • Page 245: Cooling System

    SERVICING AND MAINTENANCE flushed, and refilled with fresh Organic Additive For the proper maintenance intervals OOLING YSTEM Technology (OAT) coolant (conforming to Ú page 228. MS.90032) by an authorized dealer. Check the WARNING! Selection Of Coolant front of the radiator for any accumulation of You or others can be badly burned by hot For further information Ú...
  • Page 246 SERVICING AND MAINTENANCE This vehicle has not been designed for use We recommend using Mopar Antifreeze/ damage. If any coolant is needed to be added   with propylene glycol-based engine coolant. Coolant 10 Year/150,000 Mile (240,000 km) to the system, please contact a local autho- Use of propylene glycol-based engine coolant Formula OAT that meets the requirements of rized dealer.
  • Page 247 SERVICING AND MAINTENANCE Coolant Level rain, snow, or high humidity accumulating on WARNING! the radiator and being vaporized when the ther- The coolant bottle provides a quick visual Do not open hot engine cooling system. mostat opens, allowing hot engine coolant (anti- ...

  • Page 248: Brake System

    SERVICING AND MAINTENANCE Keep the front of the radiator clean. If your Fluid Level Check — Brake Master Cylinder  WARNING! vehicle is equipped with air conditioning, Check the fluid level in the master cylinder keep the front of the condenser clean. Use only manufacturer's recommended ...

  • Page 249: Automatic Transmission

    SERVICING AND MAINTENANCE Fluid Level Check Routine fluid and filter changes are not WARNING! (Continued) required. However, change the fluid and filter if The fluid level is preset at the factory and does the fluid becomes contaminated (with water, Do not allow petroleum based fluid to ...

  • Page 250: All Wheel Drive (Awd) - If Equipped

    SERVICING AND MAINTENANCE (AWD) — HEEL RIVE WARNING! (Continued) QUIPPED For normal service, periodic fluid level checks If the replaced fuse blows again, contact an  are not required. When the vehicle is serviced The All Wheel Drive system consists of a authorized dealer.
  • Page 251 SERVICING AND MAINTENANCE Also, please be aware that when using power Underhood Fuses WARNING! (Continued) outlets for extended periods of time with the The Front Power Distribution Center is located engine off may result in vehicle battery Before replacing a fuse, make sure that the ...
  • Page 252 SERVICING AND MAINTENANCE CAUTION! CAUTION! (Continued) When installing the power distribution When replacing a blown fuse, it is important   center cover, it is important to ensure the to use only a fuse having the correct cover is properly positioned and fully amperage rating.
  • Page 253 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Mini-Fuse Description – – Fuse – Spare 40 Amp Green – Radiator Fan #1 – (Non 6.2L Supercharged) 50 Amp Red – Electric Power Steering #1 – If Equipped 30 Amp Pink – Starter 40 Amp Green –...
  • Page 254 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Mini-Fuse Description 50 Amp Red – Radiator Fan – (Non 6.2L Supercharged) 50 Amp Red – Electric Power Steering #2 – If Equipped 30 Amp Pink – Wiper Motor 30 Amp Pink Headlamp Washers – If Equipped –...
  • Page 255 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red Engine Controller – 10 Amp Red Airbag Module A/C Clutch / EPS – If Equipped / Vacuum Pump – If – 10 Amp Red Equipped – 10 Amp Red AWD Module / Front Axle Disconnect –...
  • Page 256 SERVICING AND MAINTENANCE Rear Interior Fuses CAUTION! There is also a power distribution center located When installing the power distribution  in the trunk under the spare tire access panel. center cover, it is important to ensure the This center contains fuses and relays. Fuse cavity cover is properly positioned and fully location and descriptions are printed on the latched.
  • Page 257 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green – Exterior Lighting #2 30 Amp Pink – Interior Lighting 40 Amp Green – Power Locks 30 Amp Pink – Driver Door Control Module 30 Amp Pink – Passenger Door Control Module Dual USB Center Console Rear/ –...
  • Page 258 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Mini-Fuse Description Cygnus Transmission Module – 15 Amp Blue (Charger Non - Police/300) – 25 Amp Clear Amplifier – If Equipped – 25 Amp Breaker Power Seats – If Equipped – 15 Amp Blue HVAC Module/Cluster Ignition Switch/RF Hub Module/ Steering Column Lock (300) –...
  • Page 259 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Mini-Fuse Description Cluster / Rearview Mirror / Lane – 15 Amp Blue Departure – – Fuse – Spare Adaptive Front Lighting / Day Time – 10 Amp Red Running Lamps – If Equipped – –...
  • Page 260 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Mini-Fuse Description – – Fuse – Spare – – Fuse – Spare – 25 Amp Breaker Rear Windows (Charger/300) – 10 Amp Red Airbag Module – – Fuse – Spare Rain and Light Sensor / Sunroof / –...

  • Page 261: Bulb Replacement

    SERVICING AND MAINTENANCE EPLACEMENT Replacement Bulbs All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs are not approved and should not be used for replacement. Interior Bulbs Bulb Name Bulb Number Rear Courtesy/Reading Lamps Rear Compartment (Trunk) Lamp Overhead Console Reading Lamps Visor Vanity Lamps...
  • Page 262 SERVICING AND MAINTENANCE Exterior Bulbs Bulb Name Bulb Number Low Beam/High Beam (Bi-Halogen Headlamp) 9005HL+ Low Beam/High Beam (Bi-Xenon Headlamp) D3S (Serviced at an authorized dealer) Front Turn Signal Lamp PSY24WSV Front Park Lamp LED (Serviced at an authorized dealer) Daytime Running Lamp LED (Serviced at an authorized dealer) Front Fog Lamp –...
  • Page 263 SERVICING AND MAINTENANCE Replacing Exterior Bulbs Bi-Halogen Low Beam And High Beam Head- 4. Twist the headlamp bulb assembly counter- lamp — If Equipped clockwise, and then pull it out of the High Intensity Discharge (HID) Headlamps — headlamp assembly. See steps below to replace: If Equipped 1.
  • Page 264 SERVICING AND MAINTENANCE 7. Reinstall the access cap making sure it is 2. Reach behind the headlamp housing to 4. Squeeze the two tabs on the side of the bulb seated into the housing and turn cap access the turn signal (inboard) bulb cap. socket and pull straight out from the lamp clockwise to engage locking lugs.

  • Page 265: Tires

    SERVICING AND MAINTENANCE Rear Backup Lamp And Turn Signal Lamps Tire Markings the size designation. Example: P215/65R15 95H. The Rear Backup and Turn Signal Lamp use LED sources that are not serviceable European — Metric tire sizing is based on ...
  • Page 266 SERVICING AND MAINTENANCE Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
  • Page 267 SERVICING AND MAINTENANCE EXAMPLE: H = Speed Symbol A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions  The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle ...
  • Page 268 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.
  • Page 269 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition B-pillar The vehicle B-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a Cold Tire Inflation Pressure minimum of three hours.
  • Page 270 SERVICING AND MAINTENANCE Tire And Loading Information Placard Loading Steps For Determining Correct Load Limit— The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on (1) Locate the statement “The combined your vehicle. You will not exceed the tire's load weight of occupants and cargo should carrying capacity if you adhere to the loading never exceed XXX kg or XXX lbs.”...
  • Page 271 SERVICING AND MAINTENANCE (5) Determine the combined weight of Metric Example For Load Limit NOTE: luggage and cargo being loaded on the For example, if “XXX” amount equals 635 kg If your vehicle will be towing a trailer, load  vehicle.
  • Page 272 SERVICING AND MAINTENANCE...

  • Page 273: Tires - General Information

    SERVICING AND MAINTENANCE Safety Both underinflation and overinflation affect the WARNING! stability of the vehicle and can produce a feeling WARNING! Overloading of your tires is dangerous. of sluggish response or over responsiveness in Overloading can cause tire failure, affect the steering.
  • Page 274 SERVICING AND MAINTENANCE Ride Comfort And Vehicle Stability Inflation pressures specified on the placard are Tire pressure may increase from 2 to 6 psi always “cold tire inflation pressure”. Cold tire (13 to 40 kPa) during operation. DO NOT reduce Proper tire inflation contributes to a inflation pressure is defined as the tire pressure this normal pressure build up or your tire...
  • Page 275 SERVICING AND MAINTENANCE Radial Ply Tires Damaged Run Flat tires, or Run Flat tires that It is not recommended driving a vehicle loaded have experienced a loss of pressure should be at full capacity or to tow a trailer while a tire is in WARNING! replaced immediately with another Run Flat tire the run flat mode.
  • Page 276 SERVICING AND MAINTENANCE Tread Wear Indicators Life Of Tire NOTE: Wheel valve stem must be replaced as well Tread wear indicators are in the original The service life of a tire is dependent upon when installing new tires due to wear and tear equipment tires to help you in determining varying factors including, but not limited to: in existing tires.

  • Page 277: Tire Types

    SERVICING AND MAINTENANCE It is recommended to replace the two front tires failure to do so may adversely affect the safety WARNING! (Continued) or two rear tires as a pair. Replacing just one tire and handling of your vehicle. can seriously affect your vehicle’s handling. If Never use a tire with a smaller load index or ...

  • Page 278: Spare Tires - If Equipped

    SERVICING AND MAINTENANCE — I Snow Tires Compact Spare Tire — If Equipped PARE IRES QUIPPED Some areas of the country require the use of The compact spare is for temporary emergency CAUTION! snow tires during the Winter. Snow tires can be use only.
  • Page 279 SERVICING AND MAINTENANCE Inflate collapsible tire only after the wheel is Full Size Spare — If Equipped WARNING! properly installed to the vehicle. Inflate the The full size spare is for temporary emergency Compact and collapsible spares are for collapsible tire using the electric air pump use only.

  • Page 280: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE HEEL HEEL WARNING! CAUTION! All wheels and wheel trim, especially aluminum Limited use spares are for emergency use Avoid products or automatic car washes that and chrome plated wheels, should be cleaned only. Installation of this limited use spare tire use acidic solutions or strong alkaline regularly using mild (neutral Ph) soap and water affects vehicle handling.
  • Page 281 SERVICING AND MAINTENANCE When cleaning extremely dirty wheels including NOTE: Dark Vapor Chrome, Black Satin Chrome, or excessive brake dust, care must be taken in the If you intend parking or storing your vehicle for Low Gloss Clear Coat Wheels selection of tire and wheel cleaning chemicals an extended period after cleaning the wheels CAUTION!

  • Page 282: Snow Traction Devices

    SERVICING AND MAINTENANCE RACTION EVICES Use of traction devices require sufficient tire-to-body clearance. Due to limited clearance, the following snow traction devices are recommended. Follow these recommendations to guard against damage. Snow traction device must be of proper size for the tire, as recommended by the snow traction device manufacturer. ...

  • Page 283: Tire Rotation Recommendations

    SERVICING AND MAINTENANCE increase tread life, help to maintain mud, snow WARNING! CAUTION! (Continued) and wet traction levels, and contribute to a Using tires of different size and type (M+S, smooth, quiet ride. Drive cautiously and avoid severe turns and ...

  • Page 284: Department Of Transportation Uniform

    SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION significantly from the norm due to EMPERATURE RADES variations in driving habits, service UNIFORM TIRE QUALITY GRADES The Temperature grades are A (the practices, and differences in road highest), B, and C, representing the tire's The following tire grading categories characteristics and climate.

  • Page 285: Vehicle Storage

    SERVICING AND MAINTENANCE BODYWORK The most common causes are: WARNING! Road salt, dirt and moisture accumulation.  The temperature grade for this tire is ROTECTION TMOSPHERIC Stone and gravel impact. established for a tire that is properly inflated  GENTS and not overloaded.

  • Page 286: Preserving The Bodywork

    SERVICING AND MAINTENANCE If you carry special cargo such as chemicals, RESERVING ODYWORK  CAUTION! fertilizers, de-icer salt, etc., be sure that such Washing Do not use abrasive or strong cleaning materials are well packaged and sealed.  Wash your vehicle regularly. Always wash materials such as steel wool or scouring ...

  • Page 287: Plastic And Coated Parts

    SERVICING AND MAINTENANCE Seat Belt Maintenance LASTIC OATED ARTS WARNING! Do not bleach, dye, or clean the belts with Use Mopar Total Clean to clean vinyl upholstery. A frayed or torn belt could rip apart in a chemical solvents or abrasive cleaners. This will collision and leave you with no protection.

  • Page 288: Leather Surfaces

    SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster taken to avoid soaking your leather upholstery LASS URFACES with any liquid. Please do not use polishes, oils, Lenses All glass surfaces should be cleaned on a cleaning fluids, solvents, detergents, or The lenses in front of the instruments in this regular basis with Mopar Glass Cleaner, or any ammonia-based cleaners to clean your leather vehicle are molded in clear plastic.

  • Page 289: Technical Specifications

    TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) of overall braking effectiveness. This may be ORQUE PECIFICATIONS evident by increased pedal travel during The VIN is on the left front corner of the Lug Nut/Bolt **Lug Nut/ Lug Nut/Bolt application, greater pedal force required to slow instrument panel.

  • Page 290: Fuel Requirements

    TECHNICAL SPECIFICATIONS 3.6L E Tighten the lug nuts/bolts in a star pattern until NGINE WARNING! each nut/bolt has been tightened twice. Ensure This engine is designed to meet all that the socket is fully engaged on the lug nut/ To avoid the risk of forcing the vehicle off the emissions regulations and provide bolt (do not insert it halfway).

  • Page 291: Reformulated Gasoline

    TECHNICAL SPECIFICATIONS www.toptiergas.com for a list of TOP TIER Problems that result from using gasoline EFORMULATED ASOLINE Detergent Gasoline Retailers. containing more than 15% ethanol (E-15) or Many areas of the country require the use of gasoline containing methanol are not the Indiscriminate use of fuel system cleaning cleaner burning gasoline referred to as responsibility of the manufacturer and may void...

  • Page 292: Cng And Lp Fuel System Modifications

    TECHNICAL SPECIFICATIONS CNG A LP F content of gasoline may not be indicated on the YSTEM CAUTION! (Continued) gasoline pump; therefore, you should ask your ODIFICATIONS gasoline retailer whether the gasoline contains The use of fuel additives, which are now being ...

  • Page 293: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) All Engines 18.5 Gallons 70 Liters Engine Oil With Filter 3.6L Engine 6 Quarts 5.6 Liters 5.7L Engine 7 Quarts 6.6 Liters Cooling System* 3.6L Engine 10 Quarts 9.5 Liters 5.7L Engine – without Severe Duty II Cooling System 14.5 Quarts 13.9 Liters 5.7L Engine –...
  • Page 294 TECHNICAL SPECIFICATIONS Component Fluid, Lubricant, or Genuine Part We recommend you use a Mopar Engine Oil Filter. If a Mopar Engine Oil Engine Oil Filter Filter is unavailable only use filters that meet or exceed SAE/USCAR-36 Filter Performance Requirements. Fuel Selection – 3.6L Engine 87 Octane (R+M)/2 method, 0-15% ethanol.

  • Page 295: Chassis Fluids And Lubricants

    TECHNICAL SPECIFICATIONS CHASSIS FLUIDS AND LUBRICANTS Component Fluid, Lubricant, Or Genuine Part Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or Automatic Transmission equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Brake Master Cylinder We recommend you use Mopar DOT 3 and SAE J1703.

  • Page 296: Customer Assistance

    CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE (additional charges may apply). If you need a This is why you should always talk to an rental, it is advisable to make these authorized dealer’s service manager first. If for FOR YOUR VEHICLE arrangements when you call for an some reason you are still not satisfied, talk to appointment.

  • Page 297: Fca Us Llc Customer Center

    CUSTOMER ASSISTANCE FCA US LLC C US V USTOMER ENTER UERTO IRGIN SLANDS ERVICE ONTRACT P.O. Box 21–8004 FCA Caribbean LLC You may have purchased a service contract for a vehicle to help protect you from the high cost Auburn Hills, MI 48321–8004 P.O.

  • Page 298: Warranty Information

    CUSTOMER ASSISTANCE We appreciate that you have made a major See the Warranty Information for the terms and Safety Administration (NHTSA) in investment when you purchased the vehicle. An provisions of FCA Canada Inc. warranties addition to notifying FCA US LLC. authorized dealer has also made a major applicable to this vehicle and market.

  • Page 299: In Canada

    CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS Owner's Manuals ANADA These Owner's Manuals have been prepared If you believe that your vehicle has a To order the following manuals, you may use with the assistance of service and engineering safety defect, you should contact the either the website or the phone numbers listed specialists to acquaint you with specific FCA US below.

  • Page 300: General Information

    CUSTOMER ASSISTANCE GENERAL INFORMATION Le présent appareil est conforme aux CNR La operación de este equipo está sujeta a las d`Innovation, Science and Economic siguientes dos condiciones: The following regulatory statement applies to all Development applicables aux appareils radio 1. es posible que este equipo o dispositivo no Radio Frequency (RF) devices equipped in this exempts de licence.
  • Page 301 INDEX  ......296 ....192 ........248 WARRANTY INFORMATION Maintaining Your Air Bag System All Wheel Drive (AWD) ..........192 Maintenance Alterations/Modifications ..... 185 ............8 Redundant Air Bag Warning Light Vehicle .........287 ..........187 ....243 About Your Brakes Side Air Bags Antifreeze (Engine Coolant) ........
  • Page 302 ........246 Automatic Transmission Brake System Check Engine Light (Malfunction ........25 ........246 ..........91 Limp Home Mode Fluid Check Indicator Light) ............95 ........246 ....206 AutoPark Master Cylinder Checking Your Vehicle For Safety ............98 ..........206 Autostick Parking Checks, Safety ..........104 ........82...
  • Page 303 Cooling System ..........243 Disposal Emission Control System Maintenance ....91 Adding Coolant (Antifreeze) .......244 Antifreeze (Engine Coolant) ...... 245 Engine ..........232 Coolant Capacity ........291 Door Ajar ............84 Air Cleaner ..........237 Coolant Level ........243 Door Ajar Light ..........84 Block Heater ..........97 Disposal Of Used Coolant ......245...
  • Page 304 ............... 288 Fuel ........... 289 Filters Additives Hazard ..........237 ........... 289 Air Cleaner Clean Air Driving Through Flowing, Rising, ........58 ............. 289 ....141 Air Conditioning Ethanol Or Shallow Standing Water ........236 ........... 288 ......210 Engine Oil Gasoline Hazard Warning Flashers ........236 ............87...
  • Page 305 High Beam ...........46 Ignition ............15 Lane Change And Turn Signals ......49 High Beam/Low Beam Select ......46 Switch ............15 Lane Change Assist .........49 Instrument Cluster ........45 Inside Rearview Mirror ......38 LaneSense ............ 127 Intensity Control ..........50 Instrument Cluster ........73 Lap/Shoulder Belts ........
  • Page 306 ........85 Locks Modifications/Alterations Pressure Warning Light ..........25 ............8 ......236 Auto Unlock Vehicle Recommendation ........... 25 ...... 172 ........... 236 Automatic Door Monitor, Tire Pressure System Synthetic ........... 25 ..........296 ............ 291 Child Protection Mopar Parts Viscosity ..........
  • Page 307 Seats ............32 Recreational Towing ........140 Safety Information, Tire ......... 263 Steering .............106 Reformulated Gasoline ......... 289 Safety Tips ............ 206 Sunroof ............67 Refrigerant ........... 237 Safety, Exhaust Gas ........209 Tilt/Telescoping Steering Column ....26 Release, Hood ..........69 Schedule, Maintenance .......
  • Page 308 ..........30 ..........178 ......93 Seats Shoulder Belts Starting And Operating ........... 30 ......39 ........93 Adjustment Side View Mirror Adjustment Starting Procedures ........... 33 ........49 ............26 Easy Entry Signals, Turn Steering ........36 ......280 ..........26 Head Restraints Snow Chains (Tire Chains) Column Lock ............
  • Page 309 Tire And Loading Information Placard ...267 Snow Tires ..........276 Trailer Towing Guide ........136 Tire Markings ..........263 Spare Tires ......214 Trailer Weight ..........136 Tire Safety Information ........263 Spinning ........... 273 Transfer Case Tires ........208 Trailer Towing ........... 138 Fluid ..........
  • Page 310 ............65 Uconnect Settings Windows ......210 ............65 Customer Programmable Warning Flashers, Hazard Power ........19 ..........66 Features Warning Lights (Instrument Cluster Reset Auto-Up ......22 ............86 ........207 Passive Entry Programming Descriptions) Windshield Defroster ......282 ........296 ........51 Uniform Tire Quality Grades Warranty Information Windshield Washers ...
  • Page 311 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Chrysler brand vehicle and to provide a convenient reference source for common questions.
  • Page 312 ©2020 FCA US LLC. All Rights Reserved. Tous droits réservés. Chrysler is a registered trademark of FCA US LLC or FCA Canada Inc., used under license. Chrysler est une marque déposée de FCA US LLC ou FCA Canada Inc., utilisée sous le permis. App Store is a registered trademark of Apple...

Table of Contents