Setting A Password - Acer TravelMate 720 User Manual

Setup Utility
Parameter
User
Password is
Set
Supervisor
Password
Set User
Password
Password
on boot
Password
Check
During
Resume
Note: To set the User Password or the Password on boot,
Password Check During Resume parameters, you need to
set the Supervisor Password first.

Setting a Password

Follow these steps:
1. Use the
parameter (Supervisor or User) and press the Enter key.
92
Description
When set, this password protects the computer
from unauthorized entry.
When Password on boot and/or Password check
during Resume is enabled, you need to enter this
password to continue operation.
Before setting the user password, you need to set
the Supervisor Password.
Options: Disabled or Enabled
Press Enter to set the supervisor password. See
"Setting a Password" on page 92 on how to set a
password.
Press Enter to set the user password. See "Setting
a Password" on page 92 on how to set a
password.
When enabled, the computer prompts you for a
password when the computer boots up.
Options: Enabled or Disabled
When enabled, the computer prompts you for a
password when the computer resumes from
hibernation mode.
Options: Disabled or Enabled
and keys to highlight a Set Password
User's Guide