Test Mode - Sony SA-WA10R Service Manual

Note: Please get remote commander from the service parts when remote
commander is necessary for the repair.
• Use the bundled remote commander when remote commander is
bundled to the repairing set.
Part No. A-1717-785-A RM-ANU066
1. COLD RESET
Procedure:
1. Press the [ ] button to turn on the system.
?/1
2. Press the [PAIRING] and [
than three seconds.
3. Cold reset is executed and turn off the system.
2. VERSION CHECK
Procedure:
1. Press the [ ] button to turn on the system.
?/1
2. S-AIR ID slide switch select the "A".
3. Press the [PAIRING] button, and hold for more than three sec-
onds.
4. The color of STANDBY indicator LED is confi rmed.
RED: Normal version
ORG: TEST version
GRN: ROMOUT version
5. The frequency to which S-AIR indicator LED blinks is con-
fi rmed. The blinking frequency shows the place of ten of the
version.
6. The frequency to which PAIRING indicator LED blinks is
confi rmed. The blinking frequency shows the place of one of
the version.
7. Example: Normal version, Ver. 0.12
STANDBY indicator LED is red, S-AIR indicator LED blink-
ing once, PAIRING indicator LED blinking twice.
8. To release from this mode, press the [PAIRING] button, and
hold for more than three seconds.
SECTION 3

TEST MODE

] buttons, and hold for more
?/1
SA-WA10R
7