Panasonic DBS Series Overview page 26

Panasonic Digital Business System - Overview
April 1997
The CPC-EX Card
The CPC-EX card is an expanded and enhanced CPU card for the DBS. It replaces the CPC-
B and CPC-C cards, combining the facilities of both and providing new facilities to further
enhance the functionality of the DBS.
The CPC-EX can be fitted to any existing DBS system, directly replacing the CPC-B or -C
card installed. The memory can be RAM transferred between CPC-B v3.2 or later and CPC-
EX but not from CPC-C to CPC-EX, so full programming details must be recorded before
upgrading a card where a manual system reprogram is required.
In conjunction with the CPC-EX there is a new range of handsets, which can directly replace
the current range and offer expanded features over the previous models. The new handsets
will only operate with the CPC-EX or later software, earlier handsets will still operate with
CPC-EX.
The following new features are available with the CPC-EX.
⇒ DC5/AC15A & ISDN features on a single CPC card
⇒ Incoming ringing priority for internal or external calls
⇒ Internal call queuing at the operator
⇒ Call forward to an external number
⇒ Trunk to trunk transfer
⇒ Trunk to trunk conference
⇒ DISA break out
⇒ Expanded hunt groups to 24 groups of 32 extensions
⇒ Internal call cyclic hunting mode
⇒ Internal call ringing hunting mode
⇒ Support for 4 BLF DSS units
⇒ ISDN CLI lookup using SSD names
⇒ Support for new DBS handset range
The new handsets offer the following in addition to the current range.
⇒ Live keypad
⇒ Volume control for
Incoming internal call ringing
Incoming external call ringing
Internal call monitor
External call monitor
⇒ Off hook monitor
⇒ Handset mute
⇒ Large LED for ringing and message indication
⇒ LINE key
⇒ MIC key now an FF key function
The new extension model numbers are listed below in the section 'Proprietary Key
Telephones'.
26
Issue 6