Mecha Aging; Emergency History; Version Information; Video Level Adjustment - Sony DVP-CX875P Service Manual

This mode is prepared for measurement of
the load to the T. table as described before.
Result of the measurement is not reflected
on adjustment.
After this mode is selected, Mecha Initial
must be performed.

6-6. MECHA AGING

[3]
When is selected on this test mode screen, the machine enters
the mechanical aging mode. The following screen appears. Do not
use this mode.
### Mecha Aging ###
1. Please Select Aging Mode
2. All Mecha : Random Aging Move
3. All Mecha : +1 Move
4. All Mecha : -1 Move
5. All Mecha : 1 Disc Front
6. All Mecha : 1 Disc Rear
7. TurnTable : Random Move
8. TurnTable : Half Move
9. Door Open/Close
Exit: RETURN

6-7. EMERGENCY HISTORY

### EMG. History ###
Laser Hours CD
DVD
1. 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
2. 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
_
Select: 1-9 Scroll: UP/DOWN
(1:Last EMG.) Exit: RETURN
On the Test Mode Menu screen, selecting
mation such as servo emergency history. The history information
from last 1 up to 10 can be scrolled with ↑ key or ↓ key. Also,
specific information can be displayed by directly entering that
number with ten keys.
The upper two lines display the laser ON total hours. Data below
minutes are omitted.
Clearing History Information
Clearing laser hours
[DISPLAY] [CLEAR]
Press and
Both CD and DVD data are cleared.
Clearing emergency history
[TOP MENU] [CLEAR]
Press and
Initializing set up data
[MENU] [CLEAR]
Press and
The data have been initialized when "Set Up Initialized" mes-
sage is displayed. The EMG. History screen will be restored
soon.
xxh xxm
xxh xxm
[4]
displays the infor-
keys in this order.
keys in this order.
keys in this order.

6-8. VERSION INFORMATION

## Version Information ##
IF con. Ver:x.xxx(xxxx)
Group
SYScon. Ver:x.xxx(xxxx)
Model
Region
Servo DSP Ver: x.xxx
AVD ucode Ver: xxxxxxxx
OPT TYPE : x LASER
Exit: RETURN
The ROM version, region code, OPT type, etc. are displayed if
[5]
is selected in the Test Mode Menu.
The parenthesized hexadecimal number in the version number field
indicates the checksum value of the ROM.
Note : After down loading ROM data, sometimes it happens that
checksum is not the same as that of ROM data which has
been down loaded. In such a case, go back to the menu
and select "0. Syscon Diagnosis", then select "1. All" in
"2. Version". If the result of this operation does not give
an agreement, it must be either Down Load error or ROM
error.

6-9. VIDEO LEVEL ADJUSTMENT

On the Test Mode Menu screen, selecting
for video level adjustment. During display of color bars, OSD dis-
appears but the menu screen will be restored if pressing any key.
6-13
xx
xx
0x
[6]
displays color bars