Working Techniques; Basic Safety Rules - Husqvarna 535FBX Original Instructions Manual

IMPORTANT! This section takes up the basic safety
precautions for working with a trimmer.
Before you use this trimmer attachment, also read and
understand the safety precautions presented in the
chapter Working technique regarding working with 535
FBX in this manual.
You must understand the difference between forestry
clearing, grass clearing and grass trimming before use.

Basic safety rules

1 Make sure you can move and stand safely. Check the
area around you for possible obstacles (roots, rocks,
branches, ditches, etc.) in case you have to move
suddenly. Take great care when working on sloping
ground.
2 Do not overreach. Keep proper footing and balance at
all times.
3 Always hold the machine with both hands. Hold the
machine on the right side of your body.
4 Keep the cutting attachment below waist level.

WORKING TECHNIQUES

5 Keep all parts of your body away from the rotating
cutting attachment. Keep all parts of your body away
from hot surfaces.
WARNING! Neither the operator of the
!
machine nor anyone else may attempt to
remove the cut material while the engine
is running or the cutting equipment is
rotating, as this can result in serious
injury.
Stop the engine and cutting equipment
before you remove material that has
wound around the blade shaft as
otherwise there is a risk of injury. The
bevel gear can get hot during use and
may remain so for a while afterwards. You
could get burnt if you touch it.
WARNING! Watch out for thrown objects.
!
Always wear approved eye protection.
Never lean over the cutting attachment
guard. Stones, rubbish, etc. can be
thrown up into the eyes causing
blindness or serious injury.
–
English 89