Page 1
Connection: 2-sided end: Insert the RJ45 plug (red band) into the red socket marked with "AUX" and the RJ10 plug (blue band) into the blue base socket of the Jabra PRO 92x marked with a “phone” symbol. 2-fold Y-coupling end: Insert the 3.5 mm audio jack into the headset interface and the RJ12 plug...
Page 2
EHS mode should be set up. If the automatic configuration did not work, please select the MSH mode manually. (See manual). Base setup: Set the phone setup switch to position "A". Microphone volume setting: https://www.jabra.com/supportpages/jabra-link-14201-36/14201-36/faq/c030b786-24aa- Page 2 of 4 4d6f-90ab-fddf39d431fb...
Page 3
Important: The dial tone signal in the headset is only transmitted if one of the following ringtones is used, e.g. Standard/ Classic / Cold River / Dooing-Dooing. > Menu> Settings> Dial Tone > Internal / External https://www.jabra.com/supportpages/jabra-link-14201-36/14201-36/faq/c030b786-24aa- Page 3 of 4 4d6f-90ab-fddf39d431fb...
Page 4
Dial the phone number > "Forward" will now appear in the phone display > now press on to the appropriate function key next to the phone display > thereafter you must end the call with the button marked "Handset". https://www.jabra.com/supportpages/jabra-link-14201-36/14201-36/faq/c030b786-24aa- Page 4 of 4 4d6f-90ab-fddf39d431fb...