Kohler 1400976-2-A Installation Instructions Manual page 11

Touchless soap dispenser battery power
Table of Contents

Advertisement

Available languages

Available languages

5. Connect the Tubes
NOTE: The plastic tubes are interchangeable. Either tube can be connected to the
soap or air pump outlet.
IMPORTANT! Verify that the tubes are not pinched when connecting the control box
outlets. Do not coil extra tubing. The tubing should not hang below the outlet of the
control box.
Soap Pump Connections
Verify that the plastic tube from the spout is the appropriate length to reach the
control box.
The tube should not hang below the outlet of the control box. Cut the tube if
necessary.
Press the plastic tube onto the soap pump outlet on the control box until the tube
stops.
Verify that the tube is secure.
Kohler Co.
Plastic
Tube
Soap Pump
Outlet
11
Plastic
Tube
Air Pump
Outlet
1400976-2-A

Advertisement

Table of Contents
loading

Table of Contents