D-Link DAP-1620 Quick Installation Manual page 16

DAP-1620
12. Wait for about 20-30 seconds. After the connection is established, the
network icon will be displayed as a dot with curved lines indicating the
signal level.
Now you can connect to the web-based interface of DAP-1620 for configuring
all needed parameters. To gain access to an external network (to the Internet),
you also need to specify the default gateway and the addresses of DNS servers.
If you perform initial configuration of the extender via Wi-Fi
!
connection, note that immediately after changing the wireless default
settings of the extender you will need to reconfigure the wireless
connection using the newly specified settings.
Quick Installation Guide
16