Battery Inlay Removal - Lenovo Moto G8 Plus Service And Repair Manual

Lenovo Moto G8 Plus
Level 2 – Service and Repair Manual

Battery Inlay Removal

Preheating for Battery Inlay Removal
NOTE
The Battery Inlay can be recovered
and reused after removal.
NOTE
Battery Inlay Removal Methods A and B have
the same preheating steps, as shown below.
// CAUTION //
Do not set the Hot Plate temperature higher than
80°C (176°F). Damage to the phone may occur.
1. Set the Hot Plate to 80°C (176°F).
NOTE
Preheating with an oven is also acceptable if the
oven is set to the same temperature.
2. Place the phone on the Heating Plate, with the
Battery Inlay side down.
3. Wait 10 minutes for the Battery Inlay Adhesive
to warm up.
PAGE 19
Lenovo Confidential Restricted:
Do not share without consent from Lenovo