Table of Contents
Advertisement
1618748_extractor.qxp_Layout 1 7/17/19 9:30 AM Page 6
General instructions cont.
ENGLISH
CAUTION
!
Do not operate without the filter and ball
float valve in place.
4. Turn on the pump (Fig. 4).
5. Turn vacuum switch to the "on" position to begin
cleaning (Fig. 5).
6. When recovery tank is full, empty by using drain hose
on the front of the machine. If a pail is used to empty
the vacuum waste tank, do not use the same pail to fill
the solution tank as this can result in putting dirt and
grit into the solution line that can plug filters, orifices,
and generally degrade the solution line system (do not
reuse solution) (Fig. 6).
7. To empty solution tank, detach the wand from the end
of the vacuum hose and insert the vacuum hose into
the solution tank. Turn the vacuum switch to "on"
position and transfer solution to recovery tank (Fig.7).
Dispose of solution as outlined in step 6.
6
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Advertisement
Table of Contents
