Advertisement
VMS user manual
Shipping, Packing and Lifting
1) A knife or a pair of scissors should be used to cut the non-metallic packing of the
enclosure. Be aware not to damage the enclosure itself by opening the packaging
with a sharp tool.
2) Check the enclosure for any kind of damage as soon as it is unpacked. If found
damaged, immediately contact the manufacturer at the numbers mentioned in
'contact details' section.
3) The company cannot be held responsible for any damage caused due to improper
storing.
CAUTION:
Improper storing can cause damage to the enclosure.
Do not stack one enclosure over another while storing or during transportation.
4) Use a pallet truck for transportation of the enclosure. It is advised to unpack the
pedestal only at the time of final installation.
4
Advertisement
