Quick Start Guide
GFK-2837A
3. Configuration
You will need:
▪
PACSystems CPU Firmware 7.70 or later.
▪
SYCON.net configuration software, available from Hilscher.
Refer to their website: http://www.hilscher.com. Search for
"Communication Solutions DVD for cifX, comX and netJACK."
▪
Device driver for the CNM001 module USB connection. (Available
on the "Communication Solutions DVD for cifX, comX and
netJACK" DVD.)
▪
Mini USB cable for connecting SYCON.net to the module.
▪
PAC Machine Edition configuration and programming software
from Emerson, version 7.00 or later.
▪
Serial or Ethernet cable for connecting the PAC Machine Edition
programmer to the RX3i CPU.
▪
EDS files for the slave devices in your system, available from the
device manufacturers.
Configuration
Section 3
Sep 2019
8