To Copy Reservations; To Confirm Reservations; To Deactivate And Reactivate Weekly Timer Operation; To Delete Reservations - Daikin Siesta ATXM20R2V1B Operation Manual

Note: Press to return to the previous screen. If OFF timer
is selected, continue to step 9.
8 Press or to select the desired temperature.
Note: The set temperature for the weekly timer is displayed only
when setting the weekly timer mode.
INFORMATION
The temperature can be set between 10~32°C on the user
interface, however:
▪ in cooling and automatic operation mode, the unit will
operate at minimum 18°C even if is set at 10~17°C;
▪ in heating and automatic operation mode, the unit will
operate at maximum 30°C even if is set at 31~32°C.
9 Press .
Result: The temperature and time are set for the ON timer. The
time is set for the OFF timer. The timer lamp lights orange.
Result: A new reservation screen will appear.
10 Repeat the previous procedure to set another reservation or
press to complete the setting.
Result: is displayed on the LCD.
Note: A reservation can be copied with the same settings to another
reservations" [ 4 11].
day. Refer to "5.10.2 To copy
5.10.2

To copy reservations

A reservation can be copied to another day. The complete
reservation of the selected day of the week will be copied.
1 Press .
2 Press or to select the day of the week to be copied.
3 Press .
Result: The reservation of the selected day of the week will be
copied.
4 Press or to select the destination day.
5 Press .
Result: The whole reservation is copied to the selected day and the
timer lamp lights orange.
Note: To copy to another day, repeat the procedure.
6 Press to complete the setting.
Result: is displayed on the LCD.
Note: To change the reservation setting after copying, refer to
operation" [ 4 10].
"5.10.1 To set Weekly timer
ATXM20~35R2V1B + ATXM50R2V1B + ATXM20~35R5V1B
Daikin room air conditioner
3P485919-12S – 2020.06
5.10.3

To confirm reservations

You can confirm if all reservations are set to your needs.
1 Press .
Result: The day of the week and the reservation number of the
current day are displayed.
2 Press or to select the day of the week and reservation
number to be confirmed and check the reservation details.
Note: To change the reservation setting, refer to
operation" [ 4 10].
Weekly timer
3 Press to exit the confirmation mode.
5.10.4 To deactivate and reactivate Weekly timer
operation
1 To deactivate the Weekly timer, press
is displayed on the LCD.
Result: disappears from the LCD and the timer lamp goes
off.
2 To reactivate the Weekly timer, press
Result: The last set reservation mode will be used.
5.10.5

To delete reservations

To delete individual reservations
Use this function if you want to delete a single reservation setting.
1 Press .
Result: The day of the week and the reservation number are
displayed.
2 Press or to select the day of the week to be deleted.
3 Press .
Result: , , and
4 Press or and select "blank".
Result: The setting will change as follows:
5 Press .
Result: The selected reservation is deleted.
6 Press to exit.
Result: Remaining reservations are active.
To delete a reservation for each day of the week
Use this function if you want to delete all reservation settings for one
day of the week. This can be used in confirmation or setting mode.
1 Press .
2 Press or to select the day of the week to be deleted.
3 Hold for about 5 seconds.
Result: All reservations for the selected day are deleted.
4 Press to exit.
Result: Remaining reservations are active.
5 Operation
"5.10.1 To set
while
again.
blink.
Operation manual
11