Download Print this page

AOC 619FH User Manual

Aoc 619fh: user guide
Hide thumbs Also See for 619FH:

Advertisement

Quick Links

AOC 619Fh User's Manual
About This Guide
This guide describes the monitor's features, setup, and operation. lnformation in this document is subject to change without
notice.
The sections are as follows:
Safety
Instructions: lists safety information.
Setup: describes the initial setup process.
Using the
Monitor: gives an overview of how to use the monitor.
Drivers: provides driver installation instructions for Windows.
Technical Support
Product
Information: lists the technical specifications of the monitor.
Warranty
Statement: Warranty Statement used in Europe.
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes,
cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the
warning is mandated by regulatory authority.
: provides tips and solutions for common problems.

Advertisement

loading

Summary of Contents for AOC 619FH

  • Page 1 AOC 619Fh User’s Manual About This Guide This guide describes the monitor's features, setup, and operation. lnformation in this document is subject to change without notice. The sections are as follows:  Safety Instructions: lists safety information.  Setup: describes the initial setup process.
  • Page 2 FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3 PRECAUTIONS  Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.  Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance.
  • Page 4: Adjusting Viewing Angle

    Setup the stand and base Please setup or remove the base following below steps. Adjusting Viewing Angle  For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference.
  • Page 5 Cable Connections On Back of Monitor and Computer Turn off your computer before performing the procedure below. Connect the power cable to the AC port on the back of the monitor. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port.
  • Page 6 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC...
  • Page 7 Setting the Optimal Resolution The recommended resolution for this monitor is 1920 by 1200. To setup the monitor to this resolution, follow the steps below. Click START. Click SETTINGS. Click CONTROL PANEL. Double click DISPLAY. Click SETTINGS. Set the resolution SLIDE-BAR to 1920 by 1200. External Controls Press the power button to turn the monitor on or off.
  • Page 8 OSD Settings  Press the MENU-button to activate the OSD window.  Press+ or - to navigate through the functions. Once the desired function is highlighted, press the MENU-buttonto activate it.If the function selected has a sub-menu, press s+ or - again to navigate through the sub-menu functions.Once the desired function is highlighted, press MENU-button to activate it.
  • Page 9 DCB Adjustment What is DCB? Dynamic Color Boost (DCB) is an advanced color adjustment technology. Through analyzing RGB signals, DCB creates more vivid and natural images to suit various color environment needs. DCB has two types of color enhancers: “Color Boost” and “Picture Boost” . DCC: Dynamic color control ICM: Intelligent color management 1) How to use Color Boost?
  • Page 10 Nature Skin: When "Natural Skin" is turned on, the red and yellow colors are enriched automatically, thus presents human skin with more natural and truer colors. "Natural Skin" setting is ideal for viewing human portrait and detailed skin texture. Green Field: When "Green Field" is turned on, the green color is enriched so that football field and mountain landscape would look more natural and fresh.
  • Page 11 Sky Blue: When"Sky Blue" is turned on, the color blue is being fine-tuned so that the sky or ocean landscape will look more vivid and in-depth. "Sky Blue" setting is ideal for viewing sky and ocean images. Auto Detect: When “Auto Detect” is turned on, every pigment will be detected and self-adjusted to render a lively picture. Demo: Screen divided into two for demonstration purposes.
  • Page 12 2) How to use Picture Boost? Users can change the color settings of a self-selected zone on the screen. The size and position of the selected zone can also be adjusted. "Picture Boost" is located in the fifth icon labeled "Picture Boost" in the OSD menu. Turn on "Bright Frame" to select a zone on the screen to be enhanced.
  • Page 13 How to Use DCR? Go to the first OSD icon labeled "Luminance", turn on or off DCR as desires. DCR boosts the contrasts between lightness & darkness and enables the viewer to see more layers and details of the picture, especially in the darker areas. Please note when DCR is on, DCB will be disabled.
  • Page 14 Function Control Illustration Luminance Brightness Contrast Eco mode Gamma Image Setup Clock Phase H.Position V.Position Color Temp. Warm Normal Cool sRGB User Adjust Range 0-100 0-100 Standard Text Internet Game Movie Sports Gamma1 Gamma2 Gamma3 0-100 0-100 0-100 0-100 6500K 7300K 9300K Green...
  • Page 15 Color Boost Full Enhance Nature Skin Green Field Sky-blue AutoDetect Demo Picture Boost Frame Size Brightness Contrast H. position V.position Bright Frame OSD Setup H.Position V.Position Timeout Transparence Language Extra Input Select Auto Config Image Ratio DDC-CI Information Reset Reset Exit Exit Notes:...
  • Page 16: Installation

    How to use i-menu software Installation Welcome to use “i-menu” software by AOC. i-menu makes it easy to adjust your monitor display setting by menus on the screen instead of OSD button on the monitor. Please click here to setup the software. To complete installation , please follow the installation guide .
  • Page 17 Luminance Contrast Brightness Eco mode Gamma Reset Remarks: 1) If DCR is set to “on”, the other 4 items of Luminance cannot be adjusted. 2) If anyone of DCR, Color Boost and Bright Frame of Picture Boost is set to “on”, the others are set to “off” automatically. 3) The Brightness and Contrast can be adjusted only when Eco-mode is on “standard mode”.
  • Page 18 2. Image setup Image Setup Clock Phase H.Position V.Position Reset Adjust Range 0-100 0-100 0-100 0-100 Description Adjust picture Clock to reduce Vertical-Line noise. Adjust Picture Phase to reduce Horizontal-Line noise Adjust the verticalposition of the picture. Adjust the horizontal position of the picture. Reset the current page...
  • Page 19 3. Color Temperature Color Temp. Adjust Range Warm Normal Preset Cool sRGB User Green Blue Reset Remarks: 1) When “User” is chosen, you can change the monitor color to your desired color by setting the value of R-G-B. 2) When “sRGB” is chosen, the Brightness, Contrast and Gamma can not be adjusted. Description Recall Warm Color Temperature from EEPROM.
  • Page 20 4. Color Boost Color Boost Full Enhance Nature Skin Green Field Sky-blue AutoDetect Demo Reset Remarks: 1) There is only one item can be set to “on” except Demo. If you set any item to “on”, the others are changed to “off” automatically. 2) If anyone of DCR, Color Boost and Bright Frame of Picture Boost is set to “on”, the others are set to “off”...
  • Page 21 5. Picture Boost Picture Boost Bright Frame Frame Size Brightness Contrast H. position V.position Reset Remarks: 1) Only when Bright Frame is set to “on”, the other 5 items can be adjusted. 2) If anyone of DCR, Color Boost and Bright Frame of Picture Boost is set to “on”, the others are set to “off” automatically. Adjust Range on or off 14-100...
  • Page 22 6. Setting 7. Extra...
  • Page 23 8. Help On this page, you can find the information of the monitor . Welcome to link our website and send email to us if you have any problem. Compatibility : i-menu supports major graphic cards of ATI, Nvidia, Intel, VIA(S3). Please contact with us if your graphic card was not supported i- menu software.
  • Page 24 Operating Non-Operating ® EPA ENERGY STAR ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) GmbH has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. 619Fh TFT Color LCD 0.2865mm(H) x 0.2865mm(V) R, G, B Analog lnterface &...
  • Page 25 Preset Display Modes STAND RESOLUTION 640¡Á480 @60Hz DMT 640¡Á480 @67Hz MAC 640¡Á480 @72Hz DMT 640¡Á480 @75Hz DMT Dos-mode 720¡Á400 @70Hz DOS SVGA 800¡Á600 @56Hz DMT SVGA 800¡Á600 @60Hz DMT SVGA 800¡Á600 @72Hz DMT SVGA 800¡Á600 @75Hz DMT Mac-mode 832¡Á624 @75Hz MAC 1024¡Á768 @60HzDMT 1024¡Á768 @70Hz DMT 1024¡Á768 @75Hz DMT...
  • Page 26 Pin No. Signal Name TMDS Data 2- TMDS Data 2+ TMDS Data 2/4 Shield TMDS Data 4- TMDS Data 4+ DDC Clock DDC Data N.C. Pin No. Signal Name TMDS Data 2+ TMDS Data 2 Shield TMDS Data 2 TMDS Data 1+ TMDS Data 1Shield TMDS Data 1 TMDS Data 0+...