Antilock Brake; System (Abs) - GMC Chevrolet Camaro Owner's Manual

The system is activated and
deactivated by pressing either of the
paddles marked REV MATCH on
the steering wheel. The system
must be activated with each new
ignition cycle.
A gear indicator in the instrument
cluster displays the current gear
selected:
When ARM is activated, the
gear number is amber.
When ARM is deactivated, the
gear number is white.
If no gear number is displayed
while the shift lever is in gear,
service is required. ARM will be
disabled, and the malfunction
indicator lamp will be on. See
Malfunction Indicator Lamp
0 110. The clutch and manual
transmission will continue to
operate normally.
ARM will also:
Only be active above 25 km/h
(16 mph).
Only match engine speed up to
5400 rpm.
Not operate when the
accelerator pedal is applied.
Be disabled when the coolant
temperature is below 0 °
C (32 °F).
Driving and Operating
Brakes

Antilock Brake

System (ABS)

The Antilock Brake System (ABS)
helps prevent a braking skid and
maintain steering while
braking hard.
ABS performs a system check when
the vehicle is first driven.
A momentary motor or clicking noise
may be heard while this test is going
on, and the brake pedal may move
slightly. This is normal.
If there is a problem with ABS, this
warning light stays on. See Antilock
Brake System (ABS) Warning Light
0 113.
191