Table of Contents
Advertisement
Available languages
Available languages
ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
Overhead Cabinet Should Not Exceed
a Maximum Depth of 13" (33 cm)
30" (76.2 cm) Min.
Clearance Between
the Top of the Cooking
Platform and the Bottom
of an Unprotected
Wood or Metal Cabinet.
24" (61 cm) Min. when
Bottom of Wood
or Metal Cabinet is
Protected by Not
Less Than 1/8" Flame
Retardant Millboard
Covered With Not
Less Than No. 28 MGS
Sheet Steel, 0.015"
(0.4 mm) Stainless
Steel, 0.024" (0.6 mm)
Aluminum or 0.020"
(0.5 mm) Copper
2 1/2" (6.4 cm) Min. From Edge of
Cutout to Front Edge of Countertop
Letters on this figure refer to chart on front page except for I.
CAUTION
To eliminate the risk of burns or fire by
reaching over heated surfaces, cabinet storage space
located above the cooktop should be avoided. If cabinet
storage is provided, risk can be reduced by installing a
range hood that projects horizontally a minimum of 5"
(12.7 cm) beyond the bottom of the cabinets.
2" (5.1 cm) Min.
Recommended
Distance Between
Rear Edge of
Cutout and Nearest
Combustible Surface
Above Countertop
18"
(45.7 cm)
24"
(61 cm)
Approximate Location
of Junction Box
Figure 2 – COUNTERTOP CUTOUT OPENING
I
Min.
10"
(25.4 cm)
12"
(30.5 cm)
Model
30" Model
36" Model
2
7½" (19.1 cm)
Min. From Edge
of Cooktop
to Nearest
Combustible
Wall (Either
Side of Unit).
It is not recommended to use
drawer underneath cooktop.
Empty space is needed for
installation purpose.
I
30" (76.2 cm)
36" (91.4 cm)
Advertisement
Table of Contents
