ADTRAN NetVanta 5305 Quick Start Manual

®
NetVanta 5305 System Controller Module
Quick Start Guide
S
PECIFICATIONS
Interfaces Console: EIA-232 (DB-9 female) for access to command line
interface and monitoring
Ethernet: Two 10/100BaseT interfaces (RJ-48C) for connection
to the local area network
Compliance FCC Part 15 Class A, EN 55022 Class A, EN 55024,
EN 61000-3-2, EN 61000-3-3
UL/CUL 60950, EN 60950, IEC 60950, AS/NZS 60950
Physical Dimensions: 11.63-inch W x 8.63-inch D
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent, noncondensing
I I
NSTALLATION NSTRUCTIONS
1. Remove power from the NetVanta 5305 base unit.
1. Remove the existing system controller module from the controller slot in the base unit.
2. Slide the replacement system controller module into the controller slot until the module
is firmly seated against the chassis.
3. Secure the screws at both edges of the module. Tighten with a screwdriver.
4. Connect the cables to the associated device(s).
5. Complete the system installation as specified in the NetVanta 5305 Hardware
Installation Guide provided on your ADTRAN OS System Documentation CD.
FImportant: For additional details on product features, specifications,
installation, and safety, refer to the appropriate Hardware Installation Guide on
the ADTRAN OS System Documentation CD shipped with the base unit and
available online at www.adtran.com.
Quick Start Guide, 61200831L1-13C, July 2005
E
C
Technical Support 1-888-4ADTRAN (1-888-423-8726)
For more detailed documentation, visit us online at www.adtran.com.
P
THERNET INOUTS
Pin Name
1 TX1
2 TX2
3 RX1
4, 5 —
6 RX2
7, 8 —
P
ONSOLE INOUTS
Pin Name
1 DCD
2 RD
3 TD
4 DTR
5 SG
6 DSR
7 RTS
8 CTS
9 RI
Copyright © 2005 ADTRAN, All Rights Reserved
P/N 1200831L1
Description
Transmit Positive
Transmit Negative
Receive Positive
Unused
Receive Negative
Unused
Description
Data Carrier Detect (output)
Receive Data (output)
Transmit Data (input)
Data Terminal Ready (input)
Signal Ground
Data Set Ready (output)
Request to Send (input)
Clear to Send (output)
Ring Indicate (output)