Beurer BM 28 Instructions For Use Manual page 39

Permissible -20 °C to +55 °C, 10 to 90% relative hu-
storage conditions midity, 800-1050 hPa ambient pressure
Power supply 4 x 1.5 V
Battery life For approx. 300 measurements, de-
pending on levels of blood pressure
and pump pressure
Classification Internal supply, IP21, no AP or APG,
continuous operation, application part
type BF
The batch number is located on the device or in the battery
compartment.
Technical information is subject to change without notifica-
tion to allow for updates.
• This device conforms with the European stand-
ard EN 60601-1-2 (in accordance with CISPR 11,
IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-7, IEC 61000-4-8,
IEC 61000-4-11, EN 55024) and is subject to particular
precautions with regard to electromagnetic compatibility.
Please note that portable and mobile HF communication
systems may interfere with this device.
AA batteries
• This device complies with the EU Medical Devices
Directive 93/42/EEC, the German Medical Devices Act
(Medizinproduktgesetz) and the standards EN 1060-3
(Non-invasive sphygmomanometers – Part 3: Supplemen-
tary requirements for electro-mechanical blood pressure
measuring systems) and IEC 80601-2-30 (Medical electri-
cal equipment – Part 230: Particular requirements for the
basic safety and essential performance of automated
non-invasive sphygmomanometers).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If the device is used for commercial medical
purposes, it must be regularly tested for accuracy by
appropriate means. Precise instructions for checking ac-
curacy may be requested from the service address.
Mains part
Model no. LXCP12-006060BEH
Input 100 – 240 V, 50 – 60 Hz, 0.5 A max
Output 6 V DC, 600 mA, in conjunction with Beurer
blood pressure monitors only
Manufacturer Shenzhen Iongxc power supply co., ltd.
39