Chapter 5 Hot Swap; Removing / Installing Hard Disk Drive - ADS Technologies API-960 User Manual

This chapter explains how to remove and install the "Hot-Swap" parts without interrupting the data
access while the disk array is on.
The "Hot-Swap" parts include :
• Hard Disk Drives
• Cooling Fans
Follow the steps below and refer to the diagrams to remove and install the "Hot-Swap" parts.
REMOVING / INSTALLING HARD DISK DRIVES
Step 1. Unlock the HDD tray
(When a HDD error occurs, the HDD LED indicator lights up "RED")
Step 2. Gently pull-out the HDD tray

Chapter 5 HOT SWAP

35