Installation; Présentation; Preparations - McCulloch ROB R600 Manual

3.1 Présentation
Ce chapitre contient des renseignements importants à
savoir lorsque vous planifiez l'installation.
Avant de commencer l'installation, familiarisez-vous
avec ce qui est inclus dans la boîte.
McCULLOCH ROB R600/ROB R800/ROB R1000
Robot tondeuse
Station de charge
Bloc d'alimentation
Boucle de fil, m
Câble basse tension
Agrafes, pièces
Connecteurs, pièces
Vis pour station de charge,
pièces
Clé à six pans
Règle
Raccords, pièces
Manuel de l'opérateur et
guide de référence rapide
Lames supplémentaires,
pièces
Autocollants d'alarme
Marqueurs de câbles
3.1.1 Main components for installation
The installation of the robotic lawnmower involves 4
main components:
1. A robotic lawnmower that mows the lawn by
essentially operating in a random pattern.
2. A charging station, to where the robotic lawnmower
returns when the battery level becomes too low.
436 - 001 - 09.10.2017

3 Installation

√
√
√
150/200/200
√
200/400/400
3/3/3
3/3/3
√
√
5/5/5
√
3/3/3
√
√
3. A power supply, which is connected to the charging
station and a 100-240V wall socket. The power
supply is connected to the wall socket and to the
charging station using a 10 m / 33 ft. long low
voltage cable. Low voltage cables with 3 m / 10 ft.
and 20 m / 65 ft. length are available as optional
accessories. No parts of the power supply must be
changed or tampered with. For example the low
voltage cable must not be shortened or extended.
4. Loop wire, which is laid around the edges of the
lawn and around objects and plants that the robotic
lawnmower must not run into. The loop wire is used
both as a boundary wire and a guide wire. The
maximum permitted length for the boundary loop is
400 m / 1300 ft.

3.2 Preparations

Read through this entire chapter before beginning the
installation. How the installation is done also affects how
well the robotic lawnmower works. It is therefore
important to plan the installation carefully.
Planning is simplified if you make a sketch of the
working area, including all obstacles. This makes it
easier to see the ideal positions for the charging station,
the boundary wire and the guide wire. Draw on the
sketch where the boundary and guide wires should be
routed.
Visit www.mcculloch.com for further descriptions and
tips regarding installation.
1. If the lawn in the working area is longer than 10 cm /
4 in. mow it using a standard lawnmower. Collect the
grass.
2. Fill in holes and hollows to stop rainwater forming
pools of water. The product may be damaged if it is
operated in pools of water. See
page52 .
Garantieà la
Installation - 11