Table of Contents
Advertisement
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Maintenance
Four actions can be selected
"reboot" click the reboot button to restart system
"factory default" Click on Factory default button on the configuration page to restore
the factory default settings. Any changes made so far will be lost and the system will be
reset to the initial factory settings. The system will restart and require the installer
program to set up the network again.
"Calibrate"
Recalibrate the home position to the default center to recover the tolerance cased by
some external forces. This function is the same as the "Center" button on the Remote
Controller. Please note that there is no confirming message box after clicking on the
"Calibrate" button, the Network Camera will calibrate immediately.
"upgrade firmware" Select the firmware file and click upgrade button
48 - User's Manual
Advertisement
Table of Contents
