Advertisement
CLEANING and MAINTENANCE: FILTER
1
2
Remove steel filter cup from
Unscrew cap from the
the steel filter holder.
steel filter cup.
4
5
5A
Remove the filter from the
Remove the stainless-steel
the gasket.
filter off the plastic disc.
7
Replace the
filter and plastic
disk into the
gasket. Make
sure to insert
the pin on the
plastic disk
into the hole in
the gasket.
Note: If the filter is not cleaned and assembled properly, it could effect the crema
of the espresso. The filter assembly must be cleaned (every 200 coffees.)
10
3
Remove gasket from the
steel filter cup.
6
Clean steel filter with a brush
and the holes with a needle.
8
Replace the
assembly in the
steel filter cup,
making sure the
pin is inserted in
the hole in the
support. Finally,
screw on the
cap.
CLEANING and MAINTENANCE: FROTHER
1
Unscrew the frother by rotating
Thoroughly clean steam nozzle with cloth
clockwise and pulling downwards.
and warm water.
3
4
Clean the inside of frother
Clean frother with warm
with warm water and use
running water and use a
a needle to clean the
needle to clean the two holes.
center hole.
Frother and steam nozzle parts can be cleaned thoroughly by using De'Longhi Milk Clean.
2
5
Replace the frother by
inserting and rotating
counterclockwise.
EC155M
11
Advertisement
